Sony MHC-NX3AV Operating Instructions (primary manual) - Page 37
Timer-recording radio programmes
View all Sony MHC-NX3AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Timer-recording radio programmes 4 Set the time to start recording. Press V or v to set the hour, then press ENTER. The minute indication starts flashing. To timer-record, you must preset the radio station (see "Step 4: Presetting radio stations") and set the clock (see "Step 3: Setting the time") beforehand. 7 REC Press V or v to set the minute, then press ENTER. The hour indication flashes again. 3,4 · ª· ª· =+ p 0 ) P V B b v · p 5 Set the time to stop recording following the above procedure. The start time appears, followed by the stop time, the recording source and the radio station, then the original display appears. 3,4 6 Insert a recordable tape into deck B. 7 Turn off the power. When the recording starts, the volume level is set to the minimum. 2 TIMER SELECT 1 Tune in the preset radio station (see "Listening to the radio" on page 14). 2 Press CLOCK/TIMER. "SET (DAILY 1)" appears. To check the setting Press TIMER SELECT and press V or v to select "REC", then press ENTER. To change the setting, start over from step 1. To cancel the timer operation Press TIMER SELECT and press V or v to select "TIMER OFF", then press ENTER. Note If the power is on at the preset time, the recording will not be made. 3 Press V or v to select "REC", then press ENTER. "ON" appears and the hour digits flash in the display. REC 37