Sony MHC-NX3AV Operating Instructions (primary manual) - Page 9
Step 3: Setting the time - display
View all Sony MHC-NX3AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Step 3: Setting the time You must set the time before using the timer functions. The clock is on a 24-hour system for the European model, and a 12-hour system for other models. The 24-hour system model is used for illustration purposes. 1 Press CLOCK/TIMER. The hour indication flashes. 2 Press V or v to set the hour. The clock is on a 24-hour system for the European model and a 12-hour system for other models. 3 Press ENTER. The minute indication flashes. 3,5 1 · ª· ª· =+ p 0 ) P V B b v · p 2,4 4 Press V or v to set the minute. 5 Press ENTER. The clock starts working. Tips • If you've made a mistake, start over from step 1. • Setting the time deactivates the demo mode. If you want to display the demo mode, press DISPLAY (U.S.A., Canadian and European models) or DEMO (STANDBY) (other models) when the power is off. To change the time The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following: 1 Press CLOCK/TIMER. 2 Press V or v to select the SET CLOCK. 3 Press ENTER. 4 Perform steps 2 through 5 above. Note The clock settings are cancelled when you disconnect the power cord or if a power failure occurs. 9