Sony MHC-ZX70DVD Operating Instructions - Page 22
Adjusting the speaker, balance/level, Select TEST TONE and set TEST
View all Sony MHC-ZX70DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Speaker settings (continued) BALANCE Adjust the balance of each speaker in 1.0 dB steps from -6 dB [L] to +6 dB [R]. Default adjustments are 0.0 dB. • FRONT: The balance between the front left and right speakers. • REAR: The balance between the rear left and right speakers. LEVEL Adjust the level of each speaker in 1.0 dB steps from -10 dB to +6 dB. Default adjustments are 0.0 dB. • CENTER: The level of the center speaker. • REAR: The level of the rear speakers. • SUBWOOFER: The level of the subwoofer. TEST TONE Use the test tone to adjust the speaker volume. • OFF: The test tone is not emitted from the speakers. • ON: During adjustment of "BALANCE" or "LEVEL", the test tone is emitted from both speakers simultaneously. Note While you are playing a disc, you cannot hear the test tone. Execute the test tone after you stop playback. Adjusting the speaker balance/level 1 In the stop mode, press DVD SETUP, then select "SPEAKER SETUP". 2 Select "TEST TONE" and set "TEST TONE" to "ON". You will hear the test tone from each speaker in sequence. 3 From your listening position, press V or v repeatedly to select "BALANCE" or "LEVEL", then press ENTER. Adjust the value of "BALANCE" and "LEVEL" using V or v. During this adjustment, the test tone is emitted from both speakers simultaneously. 4 Select "TEST TONE" and set "TEST TONE" to "OFF" to turn off the test tone. To return to the default setting Select the item, then press CLEAR. Tip If you turn VOLUME (or press VOL +/- on the remote), all the speaker volumes change. 22