Sony MZ-RH10 User Manual - Page 22
Insert a recordable disc., Confirm the operation mode., Slide OPEN to open the lid. - no display
View all Sony MZ-RH10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2 Insert a recordable disc. 1 Slide OPEN to open the lid. 2 Insert a disc with the label side facing front, and press the lid down to close. Make sure to check the record-protect tab is closed. 3 Confirm the operation mode. This recorder has two operation modes, "Hi-MD mode" and "MD mode". The operation mode is automatically recognized whenever the disc is inserted. After you insert a disc, check the operation mode on the display window of the recorder. You can record on this recorder only in "Hi-MD mode". It is not possible to record in "MD mode". If you want to record in "MD mode", for example to allow the disc to be played on another component that does not support Hi-MD, connect the recorder to a computer and use the supplied software to record in MD mode (refer to the "Software Operation" section). "Hi-MD" lights up when the operation mode is Hi-MD and "MD" lights up when the operation mode is MD. • When using a 1GB Hi-MD disc, the operation mode will only be Hi-MD. • When using a standard disc (60/74/80 minutes), the operation mode can be set as follows. Disc condition Blank disc The disc contains material recorded in Hi-MD mode The disc contains material recorded in MD mode Operation mode The mode set for the "Disc Mode" in the menu.1) , When recording on this recorder, set "Disc Mode" to "Hi- MD" so that the operation mode will be "Hi-MD mode". Hi-MD MD , You cannot use this recorder to record in MD mode. Recording in "MD mode" is possible if you use the supplied software. 1) Refer to "Selecting the disc mode (Disc Mode)" (page 60) for the "Disc Mode" setting. 22