Sony MZ-RH10 User Manual - Page 79

Messages, Meaning/Remedy, Symptom, Cause/Remedy

Page 79 highlights

Symptom Cause/Remedy The operation mode of • When using a blank 60/74/80-minute standard disc in the recorder, the blank 60/74/80- the operation mode set in the "Disc Mode" menu is applied. minute standard disc , Use the "Disc Mode" menu to change the operation mode as differs from the mode desired. following formatting or the mode selected in the SonicStage software. Messages If the following messages flash in the display window on the recorder, check the chart below. Message Meaning/Remedy AVLS NO VOLUME OPERATION • AVLS is set to "On" and so the volume cannot rise higher. , Set AVLS to "Off" (page 57). BLANKDISC • A disc with no recording on it is inserted. BUSY WAIT A MOMENT • The recorder is accessing disc information. • You tried to operate the recorder while it was accessing the recorded data. , Wait until the message goes out (in rare cases, it may take a few minutes). CANNOT EDIT CANNOT OPERATE • You selected, "Group Set", "GroupRelease", "Move", or "Erase" while recording. • You tried to erase the track mark at the beginning of the first track or group. • You tried to erase a track mark to combine tracks the recorder cannot combine (a track recorded in stereo and in mono, for example). • You tried to overwrite a track marks. • You tried to change a title that includes characters the recorder cannot edit. , Editing titles cannot be done if the title includes characters that cannot be input on the recorder. • You tried to press X or T MARK during synchro-recording. CANNOT PLAY • You tried to play a track that is subject to play restrictions. • You tried to play an MP3 track with a format not supported by this recorder. , This recorder only supports MP3 tracks (MPEG-1 Audio Layer-3/ sampling frequency 44.1 kHz) that have been transferred using the SonicStage software. CANNOT RECORD • You tried to record on a disc that has already been recorded in MD mode. , On this recorder, you cannot do additional recording on a disc that is already recorded in MD mode. If you want to do additional recording on such a disc, connect the recorder to a computer and use the supplied software. 79

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119

79
Messages
If the following messages flash in the display window on the recorder, check the chart
below.
The operation mode of
the blank 60/74/80-
minute standard disc
differs from the mode
following formatting or
the mode selected in the
SonicStage software.
When using a blank 60/74/80-minute standard disc in the recorder,
the operation mode set in the “Disc Mode” menu is applied.
,
Use the “Disc Mode” menu to change the operation mode as
desired.
Message
Meaning/Remedy
AVLS NO
VOLUME
OPERATION
AVLS is set to “On” and so the volume cannot rise higher.
,
Set AVLS to “Off” (page 57).
BLANKDISC
A disc with no recording on it is inserted.
BUSY WAIT A
MOMENT
The recorder is accessing disc information.
You tried to operate the recorder while it was accessing the recorded data.
,
Wait until the message goes out (in rare cases, it may take a few
minutes).
CANNOT EDIT
You selected, “Group Set”, “GroupRelease”, “Move”, or “Erase” while
recording.
You tried to erase the track mark at the beginning of the first track or
group.
You tried to erase a track mark to combine tracks the recorder cannot
combine (a track recorded in stereo and in mono, for example).
You tried to overwrite a track marks.
You tried to change a title that includes characters the recorder cannot edit.
,
Editing titles cannot be done if the title includes characters that cannot
be input on the recorder.
CANNOT
OPERATE
You tried to press
X
or T MARK during synchro-recording.
CANNOT PLAY
You tried to play a track that is subject to play restrictions.
You tried to play an MP3 track with a format not supported by this
recorder.
,
This recorder only supports MP3 tracks (MPEG-1 Audio Layer-3/
sampling frequency 44.1 kHz) that have been transferred using the
SonicStage software.
CANNOT
RECORD
You tried to record on a disc that has already been recorded in MD mode.
,
On this recorder, you cannot do additional recording on a disc that is
already recorded in MD mode. If you want to do additional recording
on such a disc, connect the recorder to a computer and use the
supplied software.
Symptom
Cause/Remedy