Sony NWZ-S716F Operation Guide - Page 11

11 Table of Contents Menu Index  Headphone jack For connecting the headphones. Insert the jack pin until it clicks into place. If the headphones are connected improperly, the sound from the headphones may not sound right. About the Noise Canceling function The Noise Canceling function is available only when using the supplied headphones. The supplied headphones can only be used for these models, and cannot be used for other equipment.  Strap hole This is used to attach a strap (sold separately).  HOLD switch You can protect the player against accidental operation by using the HOLD switch when carrying it. By sliding the HOLD switch in the direction of the arrow , all operation buttons are disabled. If you slide the HOLD switch to the opposite position, the HOLD function is released.  Display The display may vary, depending on functions ( page 12).  VOL +*2/- button Adjusts the volume.  OPTION/PWR OFF button*1 Displays the option menu ( page 19). If you press and hold the OPTION/ PWR OFF button, the screen turns off and the player enters the standby mode. If you press any button while the player is in the standby mode, the "Now Playing" screen, etc., appears and the player is ready for operation. Furthermore, if you leave the player in the standby mode for about a day, the player turns completely off automatically. If you press any button when the player is turned off, the start up screen appears first, then the "Now Playing" screen appears. Note  The player consumes battery power very slightly even when it is in the standby mode. Therefore, the player might turn completely off in a short time, depending on the power remaining in the battery. *1 Functions marked with on the player are activated if you press and hold the corresponding buttons. *2 There are tactile dots. Use them to help with button operations.