Sony PCV-R553DS Reference Manual - Page 47

Removing an Add-in, Replacing the Cover, Replace any add-in cards that were removed.

Get Sony PCV-R553DS - Vaio Digital Studio Desktop Computer PDF manuals and user guides View all Sony PCV-R553DS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Removing, Installing, and Replacing Components 33 8 If necessary, remove any add-in cards (see "Removing an Add-in Card" on page 30) to gain access to the battery. You may also need to disconnect some cables. ! Touch any exposed metal part of chassis to discharge static electricity in your body before handling an add-in card or other sensitive electronic component. 9 Use a small flathead screwdriver or your finger to push out against the small tab at one end of the battery holder to pop out the battery. Push in here to pop out battery KY0072.VSD 10 Gently lift out the battery and dispose of it according to the instructions that came with the new battery. 11 Insert the new battery into the battery holder with the plus (+) side up. ✍ The Sony CR2032 battery is recommended. Using a type of battery other than a CR2032 may present a risk of fire or explosion. 12 Push down on the battery with your finger until it snaps into position. 13 Replace any add-in cards that were removed. 14 Reconnect any cables that were disconnected. 15 Replace the cover (see "Replacing the Cover" on page 27). 16 Reconnect the power cord and turn on the computer.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
Removing, Installing, and Replacing Components
33
8
If necessary, remove any add-in cards (see
“
Removing an Add-in
Card
”
on page 30) to gain access to the battery. You may also need to
disconnect some cables.
9
Use a small flathead screwdriver or your finger to push out against
the small tab at one end of the battery holder to pop out the battery.
10
Gently lift out the battery and dispose of it according to the
instructions that came with the new battery.
11
Insert the new battery into the battery holder with the plus (+) side
up.
12
Push down on the battery with your finger until it snaps into
position.
13
Replace any add-in cards that were removed.
14
Reconnect any cables that were disconnected.
15
Replace the cover (see
“
Replacing the Cover
”
on page 27).
16
Reconnect the power cord and turn on the computer.
!
Touch any exposed metal part of chassis to discharge static electricity in
your body before handling an add-in card or other sensitive electronic
component.
The Sony CR2032 battery is recommended. Using a type of battery other than a
CR2032 may present a risk of fire or explosion.
KY0072.VSD
Push in here to
pop out battery