Sony PCV-R553DS Reference Manual - Page 58
Slide the drive holder back so that the tabs slip into the notches. - motherboard
View all Sony PCV-R553DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
44 VAIO Digital Studio™ Reference Manual 10 Connect the second power connector to the new drive. Second power connector Second drive connector KY0085.VSD 11 Make sure the drive connector is connected securely to the motherboard. 12 Lower the drive holder down and slide it back into the chassis (A in next diagram). Be sure to align all four slots on the drive holder with the tabs on top of the chassis. 13 Slide the drive holder back so that the tabs slip into the notches. B B B B A KY0086.VSD 14 Replace the four screws (B) that secure the drive holder to the chassis. 15 Replace the cover (see "Replacing the Cover" on page 27).
VAIO Digital Studio
™
Reference Manual
44
10
Connect the second power connector to the new drive.
11
Make sure the drive connector is connected securely to the
motherboard.
12
Lower the drive holder down and slide it back into the chassis (A in
next diagram). Be sure to align all four slots on the drive holder with
the tabs on top of the chassis.
13
Slide the drive holder back so that the tabs slip into the notches.
14
Replace the four screws (B) that secure the drive holder to the chassis.
15
Replace the cover (see
“
Replacing the Cover
”
on page 27).
KY0085.VSD
Second power connector
Second drive connector
KY0086.VSD
B
B
B
B
A