Sony PCWA-C300S Operating Instructions - Page 25
If Data Encryption WEP is enabled for the Access Point
View all Sony PCWA-C300S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
z Hints • If the computer is not connected to a wireless network, an "x" is shown for the "Wireless Network Connection *" icon in the "Network Connections" window. Getting started • If you have installed Windows XP Service Pack 1, see page 26. 3 From the "Available Wireless Networks" list in the "Connect to Wireless Network" dialog box, select the Access Point to which you want to connect. z Hint The "Available Wireless Networks" list shows the names of Access Points within communication range of the computer. When using the Wireless LAN Access Point PCWA-A320, the default Network Name (SSID) of the Access Point is shown on the ID label of the card. For details on the position of the label and other information, refer to the manuals of the Access Point. Because the Network Name of an Access Point may have been changed, consult your network administrator if you are not sure. 4 If Data Encryption (WEP) is enabled for the Access Point, enter the encryption key (WEP key) in the "Network key" field. The key entered here must be exactly the same as that set for the Access Point. Permissible characters and their maximum number are detailed below. ASCII Hexadecimal Permissible characters Alphanumeric characters 0 to 9, A to F, a to f Maximum number of characters 5 or 13 characters 10 or 26 characters 25