Sony PCWA-C300S Operating Instructions - Page 61

When using a Wireless LAN PC Card in Peer to Peer, Access Point

Get Sony PCWA-C300S - Wireless Lan Pc Card PDF manuals and user guides View all Sony PCWA-C300S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Symptom Data transfer speed is slow I cannot remember the WEP Key. Cause/Remedy There is interference with other Access Points. c Try changing the Access Point channel setting. The network is handling a large amount of simultaneous traffic. c Try again when the network load is lower. Communication distance is long. c Reduce the communication distance. There are obstacles (objects blocking radio transmission) within the communication range. c Remove the obstacles or change the installation location. c When using an Access Point, reset the Access Point to its defaults. For further information about how to reset the Access Point, see the Access Point Operating Instructions. c When using a Wireless LAN PC Card in Peer to Peer Network connection mode, delete the network settings registered on each computer connected to the network, then reconfigure the computer's wireless network settings. Additional information 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
61
Additional inf
ormation
Symptom
Cause/Remedy
Data transfer speed is
slow
I cannot remember the
WEP Key.
There is interference with other Access Points.
c
Try changing the Access Point channel setting.
The network is handling a large amount of simultaneous
traffic.
c
Try again when the network load is lower.
Communication distance is long.
c
Reduce the communication distance.
There are obstacles (objects blocking radio transmission)
within the communication range.
c
Remove the obstacles or change the installation location.
c
When using an Access Point, reset the Access Point to its
defaults. For further information about how to reset the
Access Point, see the Access Point Operating Instructions.
c
When using a Wireless LAN PC Card in Peer to Peer
Network connection mode, delete the network settings
registered on each computer connected to the network, then
reconfigure the computer’s wireless network settings.