Sony PEG-SJ20 Operating Instructions

Sony PEG-SJ20 - CLIÉ - Palm OS Manual

Get Sony PEG-SJ20 - CLIÉ - Palm OS PDF manuals and user guides
UPC - 027242608023
View all Sony PEG-SJ20 manuals
Add to My Manuals
Save this manual to your list of manuals

Sony PEG-SJ20 manual content summary:

  • Sony PEG-SJ20 | Operating Instructions - Page 1
    Chapter 1 Basic operations of your Sony CLIÉ Handheld Operating Instructions Chapter 2 Using basic applications Chapter 3 Exchanging and updating data using a HotSync® operation Personal Entertainment Organizer PEG-SL10/PEG-SJ20/PEG-SJ30 © 2002 Sony Corporation Chapter 4 Communicating using your
  • Sony PEG-SJ20 | Operating Instructions - Page 2
    About this manual 5 Differences between the PEG-SL10, PEG-SJ20, and PEG-SJ30 6 Chapter 1 Basic operations of your Sony CLIÉ Handheld Turning your Sony CLIÉ Handheld on and off 8 Using the stylus 9 Using the Jog Dial™ navigator 11 Entering data into your Sony CLIÉ Handheld 12 Using Graffiti
  • Sony PEG-SJ20 | Operating Instructions - Page 3
    using your Sony CLIÉ Handheld Beaming between your Sony CLIÉ Handheld and another Palm OS® PDA .... 129 What you can do with beaming 129 Beaming information 130 Receiving beamed information 131 Tips on beaming information 131 Using Memory Stick® media 132 What is Memory Stick® media 132
  • Sony PEG-SJ20 | Operating Instructions - Page 4
    Stick® media to transfer data 191 Performing a HotSync® operation between your old CLIÉ handheld and the new Palm Desktop for CLIÉ software .......... 193 Precautions 194 Notes on use 194 Battery considerations (PEG-SL10) ...... 195 Battery considerations (PEG-SJ20/PEG-SJ30 198 Troubleshooting
  • Sony PEG-SJ20 | Operating Instructions - Page 5
    manual Welcome to the Sony Personal Entertainment Organizer (referred to as the "CLIÉ handheld" in this manual). Your CLIÉ handheld comes with three manuals: Read This First Read This First provides an overview of your CLIÉ handheld's features, hardware and software setup, installation instructions
  • Sony PEG-SJ20 | Operating Instructions - Page 6
    About this manual Differences between the PEG-SL10, PEG-SJ20, and PEG-SJ30 This manual describes the operation of three CLIÉ handheld models: PEGSL10, PEG-SJ20, and PEG-SJ30. Following is the major differences in these models: PEG-SL10 • Two AAA (LR03) batteries • Monochrome LCD PEG-SJ20 • Built-in
  • Sony PEG-SJ20 | Operating Instructions - Page 7
    the Jog Dial™ navigator 11 Entering data into your Sony CLIÉ Handheld 12 Using Graffiti® writing to enter data 12 Using the onscreen keyboard 21 Using your computer keyboard 23 Adjusting the screen 24 Resetting your Sony CLIÉ Handheld 25 Performing a soft reset 25 Performing a hard reset 26
  • Sony PEG-SJ20 | Operating Instructions - Page 8
    Turning your Sony CLIÉ Handheld on and off Turning on your CLIÉ handheld Press the POWER button. Your CLIÉ handheld is turned on, and the last screen you viewed is displayed. Press the POWER button. BACK button When you turn on your CLIÉ handheld for the first time, the Setup screen appears. Tip
  • Sony PEG-SJ20 | Operating Instructions - Page 9
    enter characters or specify an application you want to run. Taking out the stylus The stylus is stored in the holder on the back panel of your CLIÉ handheld. Pull it out when using your CLIÉ handheld. Take out the stylus. To avoid losing the stylus, always put it back in its holder
  • Sony PEG-SJ20 | Operating Instructions - Page 10
    on your computer, you can also use the stylus to drag an item on the screen of your CLIÉ handheld. Press the stylus lightly on the item and move it along the screen surface. Touch the desired item another activity. See page 157 for details. Chapter 1 Basic operations of your Sony CLIÉ Handheld 10
  • Sony PEG-SJ20 | Operating Instructions - Page 11
    the instructions for each application. Rotating while holding down the Jog Dial navigator Some applications support operations executed by rotating and pressing the Jog Dial navigator. For details, refer to the instructions for each application. Chapter 1 Basic operations of your Sony CLIÉ Handheld
  • Sony PEG-SJ20 | Operating Instructions - Page 12
    Entering data into your Sony CLIÉ Handheld Using Graffiti® writing to enter data This section describes are portions of the regular alphabet equivalents. • The Graffiti writing area is divided into two parts: one for writing the letters of the alphabet and one for writing numbers. The small marks
  • Sony PEG-SJ20 | Operating Instructions - Page 13
    Entering data into your Sony CLIÉ Handheld Writing Graffiti letters 1 Tap where you want your text to go. That is all there is to it. When you lift the stylus from the screen, your CLIÉ handheld recognizes your stroke immediately and prints the letter at the insertion point on the screen. As soon as
  • Sony PEG-SJ20 | Operating Instructions - Page 14
    Entering data into your Sony CLIÉ Handheld Note You must begin the character strokes in the Graffiti writing area. If you do not make Graffiti strokes in the Graffiti writing area, your CLIÉ handheld does not recognize them as text characters. Tips • Accuracy improves when you write large characters
  • Sony PEG-SJ20 | Operating Instructions - Page 15
    Entering data into your Sony CLIÉ Handheld Writing Graffiti alphabet Write Graffiti letters corresponding to the letters D E F G H I J K L M Space Carriage Return N O P Q R S T U V W X Y Z Back Space Period Tap twice Chapter 1 Basic operations of your Sony CLIÉ Handheld Continued on next page 15
  • Sony PEG-SJ20 | Operating Instructions - Page 16
    Entering data into your Sony CLIÉ Handheld To write capital letters Shift to caps and then you can make capital letters with the same stroke on the right-hand side (numbers side) of the Graffiti writing area. 0 5 1 6 2 7 3 8 4 9 Chapter 1 Basic operations of your Sony CLIÉ Handheld 16
  • Sony PEG-SJ20 | Operating Instructions - Page 17
    Entering data into your Sony CLIÉ Handheld Writing punctuation marks Make a single tap on the Graffiti writing area to activate Punctuation square bracket (]) Right square bracket (-) Swung dash (\) Grave accent (;) Semicolon (:) Colon Tab Chapter 1 Basic operations of your Sony CLIÉ Handheld 17
  • Sony PEG-SJ20 | Operating Instructions - Page 18
    Entering data into your Sony CLIÉ Handheld Writing symbols and extended characters Make a Symbol Shift stroke on the Graffiti quotation (") Right double quotation (§) Section (º) Degree + - x ÷ = (¢) Cent (¥) Yen (£) Pound ( ) Euro Chapter 1 Basic operations of your Sony CLIÉ Handheld 18
  • Sony PEG-SJ20 | Operating Instructions - Page 19
    Entering data into your Sony CLIÉ Handheld Writing accented characters and non-English characters To create accented characters, draw the stroke normally used to these non-English characters on the left side of the Graffiti writing area. Chapter 1 Basic operations of your Sony CLIÉ Handheld 19
  • Sony PEG-SJ20 | Operating Instructions - Page 20
    Entering data into your Sony CLIÉ handheld Using Navigation strokes In addition to character symbols, Graffiti writing includes special strokes that you can use to ts Date/time stamps dts Meeting me Breakfast br Lunch lu Dinner di Chapter 1 Basic operations of your Sony CLIÉ Handheld 20
  • Sony PEG-SJ20 | Operating Instructions - Page 21
    Entering data into your Sony CLIÉ Handheld Using the onscreen keyboard You can open the onscreen keyboard any time you need to enter text or numbers into your CLIÉ handheld. Note that you cannot enter Graffiti characters while using the onscreen keyboard. To use the onscreen keyboard: 1 Open any
  • Sony PEG-SJ20 | Operating Instructions - Page 22
    Entering data into your Sony CLIÉ Handheld Tab Caps lock Alphabetic Backspace Carriage return Caps shift Tap here to display alphabetic keyboard Numeric finish, tap Done to close the onscreen keyboard and place the text in the record. Chapter 1 Basic operations of your Sony CLIÉ Handheld 22
  • Sony PEG-SJ20 | Operating Instructions - Page 23
    Entering data into your Sony CLIÉ Handheld Using your computer keyboard If you have a lot of data to enter, or prefer to use the computer keyboard, you can use the Palm™ Desktop for CLIÉ software or any other supported personal information manager (PIM), such as Microsoft Outlook®, to enter
  • Sony PEG-SJ20 | Operating Instructions - Page 24
    the contrast (PEG-SL10/ PEG-SJ20) or brightness (PEG-SJ30) according to the lighting conditions or temperature of the environment where you use your CLIÉ handheld. Turning the "Turning on your Sony CLIÉ Handheld for the first time" in the Read This First manual. Chapter 1 Basic operations of your
  • Sony PEG-SJ20 | Operating Instructions - Page 25
    Resetting your Sony CLIÉ Handheld Under normal circumstances, you do not have to reset your CLIÉ handheld. On rare occasions, however, your CLIÉ handheld may no longer respond to buttons or the screen due to insufficient memory or other reasons. In this case, you need to perform a reset to get your
  • Sony PEG-SJ20 | Operating Instructions - Page 26
    stored in your CLIÉ handheld are erased. Perform a hard reset only if a soft reset does not solve your problem. You can restore your CLIÉ handheld data if you save a back-up on your computer or Memory Stick media. For details on how to save a back-up, see "Backing up data of your Sony CLIÉ handheld
  • Sony PEG-SJ20 | Operating Instructions - Page 27
    to perform tasks that are specific to the basic applications of your CLIÉ handheld: Date Book, Address Book, To Do List, Memo Pad, and Do List menus 69 Creating memos (Memo Pad 70 Creating a new memo 70 Reviewing memos 72 Editing memos 75 Using the Memo Pad menus 77 Using Calculator (Calc
  • Sony PEG-SJ20 | Operating Instructions - Page 28
    Managing schedules and events (Date Book) Date Book lets you quickly and easily schedule appointments or any activity associated with a date, or a date and time. A record in Date Book is called an "event." Scheduling an event Scheduling an event for the current date 1 Press the Date Book button on
  • Sony PEG-SJ20 | Operating Instructions - Page 29
    Managing schedules and events (Date Book) 3 Enter a description of the event. You can enter a description or a note of up to 255 characters in length. 4 If the event is one hour long, skip to step 7. If the event is longer or shorter than one hour, tap the time of the event to open the Set Time
  • Sony PEG-SJ20 | Operating Instructions - Page 30
    Managing schedules and events (Date Book) Tip You can open the Set Time dialog box (to select a start time) by writing a number on the number side of the Graffiti writing area and making sure no event is selected. To schedule an untimed event In step 5, tap No Time. A new untimed event is displayed
  • Sony PEG-SJ20 | Operating Instructions - Page 31
    Managing schedules and events (Date Book) Tip You can also use the scroll button on the front panel to move forward or backward one day or one month at a time. To schedule an untimed event In step 3, tap New and then tap No Time. Then follow the steps for "Scheduling an event for the current date."
  • Sony PEG-SJ20 | Operating Instructions - Page 32
    Managing schedules and events (Date Book) 4 Tap the Repeat box. The Change Repeat dialog box appears. 5 Tap Day, Week, Month, or Year to set how often the event repeats. For a continuous event, tap Day. 6 Enter a number that corresponds to how often you want the event to repeat on the Every line.
  • Sony PEG-SJ20 | Operating Instructions - Page 33
    Managing schedules and events (Date Book) • When you tap Month: On the Repeat by line, tap Day to repeat the event on the specified day of the same week each month, or tap Date to repeat the event on the specified date each month. 7 To specify an end date for the repeating or continuous event, tap
  • Sony PEG-SJ20 | Operating Instructions - Page 34
    (e.g., daily to weekly) of a repeating event, past occurrences (prior to the day on which you change the setting) are not changed, and your CLIÉ handheld creates a new repeating event. • If you change the date of an occurrence of a repeating event (e.g., from January 14 to January 15) and apply the
  • Sony PEG-SJ20 | Operating Instructions - Page 35
    Managing schedules and events (Date Book) Checking schedules Displaying the Day view You can display and check the events for a specific day. 1 Press the Date Book button on the front panel. Date Book starts. Today's schedule is displayed. 2 Rotate the Jog Dial™ navigator to display the events for
  • Sony PEG-SJ20 | Operating Instructions - Page 36
    of your events for an entire week. This view lets you quickly review your appointments and available time slots. In addition, the graphical display helps . 3 Rotate the Jog Dial navigator to select the day that you want to review. To select the next day, rotate the Jog Dial navigator. 4 Press the
  • Sony PEG-SJ20 | Operating Instructions - Page 37
    Managing schedules and events (Date Book) To view the detail of an event Tap each time bar to view the detail of that event. To spot event conflicts An event conflict (time overlap) appears in the Week view as overlapping time bars and in the Day view as overlapping brackets to the left of the
  • Sony PEG-SJ20 | Operating Instructions - Page 38
    3 Rotate the Jog Dial navigator to select the day that you want to review. To select the next day, rotate the Jog Dial navigator. 4 Press the month. • Use the scroll buttons on the front panel of your CLIÉ handheld to move between months. Press the scroll button upwards to display the previous
  • Sony PEG-SJ20 | Operating Instructions - Page 39
    Agenda view screen appears. Today's schedule and To Do List is displayed. 3 Rotate the Jog Dial navigator to select the day that you want to review. To select the next day, rotate the Jog Dial navigator. Tips • Tap any appointment while in Agenda view to display the Day view of the
  • Sony PEG-SJ20 | Operating Instructions - Page 40
    Managing schedules and events (Date Book) Changing Date and Time view Tap and hold the date in the title bar of Date Book. The current time appears. b When you release the stylus, the menu bar appears. If you want to avoid displaying the menu when releasing the stylus, drag the stylus away from the
  • Sony PEG-SJ20 | Operating Instructions - Page 41
    Managing schedules and events (Date Book) Editing Date Book events Changing a date or time for an event 1 On the Date Book screen, tap the event you want to edit. 2 Tap Details. The Event Details dialog box appears. 3 • To change the time, tap the Time box and select a new time. The Set Time dialog
  • Sony PEG-SJ20 | Operating Instructions - Page 42
    Managing schedules and events (Date Book) Changing a timed event to an untimed event 1 On the Date Book screen, tap the event you want to edit. 2 Tap Details. 3 Tap the Time box. The Set Time screen appears. 4 Tap No Time. The Event Details screen appears. 5 Tap OK. The untimed event is displayed in
  • Sony PEG-SJ20 | Operating Instructions - Page 43
    the event with the alarm. Tip You can also set your CLIÉ handheld to flash its LED for an event instead of, or in addition to, an audible alarm. For details, see "Turning the LED alarm on or off (PEGSJ20/PEG-SJ30)" on page 167. 1 On the Date Book screen, tap the event
  • Sony PEG-SJ20 | Operating Instructions - Page 44
    the night of February 3. The reminder remains onscreen until you turn on your handheld and tap OK to erase it. Making an event private You can hide records that you mark as private. If you define a password for your CLIÉ handheld, you must enter it to display private records. 1 On the Date Book
  • Sony PEG-SJ20 | Operating Instructions - Page 45
    cancel deletion, tap Cancel. Tip If you select the "Save archive copy on PC" check box, the deleted event will be saved onto the Palm™ Desktop for CLIÉ software on your computer during the next HotSync® operation. Chapter 2 Using Basic applications 45
  • Sony PEG-SJ20 | Operating Instructions - Page 46
    that were formed before the specified date. Use this function to save memory space. Notes • A reoccurring event will not be deleted. • By default, the events that you purge will be saved in the Palm Desktop for CLIÉ software on your computer at the next HotSync® operation. To delete the events
  • Sony PEG-SJ20 | Operating Instructions - Page 47
    Managing schedules and events (Date Book) Preferences Display Options Phone Lookup Security About Date Book • Start/End Time: Defines the start and end times for Date Book screens. If the time slots you select do not fit on one screen, you can tap the scroll arrows to scroll up and down. • Alarm
  • Sony PEG-SJ20 | Operating Instructions - Page 48
    repeatedly to cycle through the categories in which you have entries. 2 Tap New. The Address Edit screen appears. b 3 Enter the last name of the person you want to add to Address Book. The first letter of each field (except numeric and e-mail fields) is automatically capitalized. 4 Tap First name
  • Sony PEG-SJ20 | Operating Instructions - Page 49
    displayed again. Tip You can also use the Palm™ Desktop for CLIÉ software to create entries on your computer and then download them to your CLIÉ handheld with your next HotSync® operation. See "Performing a local HotSync® operation with the USB cable" on page 103 for details. Chapter 2 Using Basic
  • Sony PEG-SJ20 | Operating Instructions - Page 50
    Managing addresses and phone numbers (Address Book) Viewing Address Book entries 1 Press the Address Book button on the front panel. The Address screen is displayed, listing your current entries. 2 Rotate the Jog Dial™ navigator to select the address entry you want to view. If the desired address
  • Sony PEG-SJ20 | Operating Instructions - Page 51
    Managing addresses and phone numbers (Address Book) Viewing addresses by category Press the Jog Dial navigator when the address list is displayed but none of the listed entries are selected. Each time you press the Jog Dial navigator, the display toggles through all the available categories. To
  • Sony PEG-SJ20 | Operating Instructions - Page 52
    Managing addresses and phone numbers (Address Book) Sorting the address entries in the list You can sort the address entries in your desired order: listing by last and then first name, or listing by company and then last name. The address entries will be displayed in the selected order when you
  • Sony PEG-SJ20 | Operating Instructions - Page 53
    Managing addresses and phone numbers (Address Book) Looking up an address entry The Look Up feature helps you to quickly scroll to any of your address entries. 1 On the Address Book list screen, enter the first letter of the entry you want to find. The list scrolls to the first entry that begins
  • Sony PEG-SJ20 | Operating Instructions - Page 54
    paste an image to the address entry. Paste a photograph of a person or restaurant, for example, as a reminder of an address entry. To your CLIÉ handheld with the PictureGear™ Pocket application. For details, see "Viewing image files (Picture Gear Pocket)" in the Add-on Application Guide. 1 Tap
  • Sony PEG-SJ20 | Operating Instructions - Page 55
    Desktop for CLIÉ software to change the category of the address entry that has a pasted image, the image will no longer be associated with the address entry after the next HotSync® operation. To edit an address entry with a pasted image, use the Address Book application in your CLIÉ handheld
  • Sony PEG-SJ20 | Operating Instructions - Page 56
    Managing addresses and phone numbers (Address Book) Modifying an address entry You can modify part of the address entry. 1 On the Address Book list screen, tap the entry you want to modify. The Address View screen of the selected entry
  • Sony PEG-SJ20 | Operating Instructions - Page 57
    address entry You can copy existing address entries you have created. This feature is useful when you use the address of one person or edit part of the address for another person. 1 On the Address Book list screen, tap the entry you want to copy. The Address View screen of the selected record
  • Sony PEG-SJ20 | Operating Instructions - Page 58
    cancel deletion, tap Cancel. Tip If you select the "Save archive copy on PC" check box, the deleted data will be saved onto the Palm Desktop for CLIÉ software on your computer during the next HotSync® operation. Chapter 2 Using Basic applications 58
  • Sony PEG-SJ20 | Operating Instructions - Page 59
    Managing addresses and phone numbers (Address Book) Changing the address entry details You can change the type of information that appears in the address list screen, categorize an entry, and hide an entry for security reasons. You can also delete entries. 1 On the Address Book list screen, tap the
  • Sony PEG-SJ20 | Operating Instructions - Page 60
    , the entry that you delete will be saved onto the Palm Desktop for CLIÉ software on your computer during the next HotSync® operation. To delete the . Beam Business Card Sends the current business card to another CLIÉ handheld via the infrared communications port. Tip You can also send a business
  • Sony PEG-SJ20 | Operating Instructions - Page 61
    Managing addresses and phone numbers (Address Book) Options menus Font Preferences Rename Custom Fields Security About Address Book You can select a desired font in the Select Font dialog box. Remember last category: Determines how Address Book appears when you return to it from another
  • Sony PEG-SJ20 | Operating Instructions - Page 62
    Managing tasks and things to do (To Do List) A To Do List is a reminder of some task you have to complete. A record in To Do List is called an "item." Creating To Do List items 1 Press the To Do List button on the front panel. To Do List opens and displays the category of items you last viewed. Note
  • Sony PEG-SJ20 | Operating Instructions - Page 63
    Managing tasks and things to do (To Do List) Viewing To Do List items You can check the items you recorded in To Do List. 1 Press the To Do List button on the front panel. The To Do screen appears. 2 Rotate the Jog Dial™ navigator to select the To Do List item that contains the note you want to view
  • Sony PEG-SJ20 | Operating Instructions - Page 64
    Managing tasks and things to do (To Do List) Checking off a To Do List item You can check off a To Do List item to remind you that you've completed it. You can set To Do List to record the date that you completed the To Do item, and you can choose to show or hide completed items. For details, see "
  • Sony PEG-SJ20 | Operating Instructions - Page 65
    Managing tasks and things to do (To Do List) Working with To Do List Setting the priority of an item The priority setting for items lets you arrange the tasks in your To Do List according to their importance or urgency. The default setting for To Do List is to arrange items by priority and due date,
  • Sony PEG-SJ20 | Operating Instructions - Page 66
    Managing tasks and things to do (To Do List) Setting the due date for an item You can associate a due date with any To Do List item. You can also sort the items that appear in the list based on their due date. 1 On the To Do List screen, tap the text of the item whose due date you want to set. 2 Tap
  • Sony PEG-SJ20 | Operating Instructions - Page 67
    cancel deletion, tap Cancel. Tip If you check the "Save archive copy on PC" check box, the deleted item will be saved onto the Palm Desktop for CLIÉ software on your computer during the next HotSync® operation. Chapter 2 Using Basic applications 67
  • Sony PEG-SJ20 | Operating Instructions - Page 68
    Managing tasks and things to do (To Do List) Changing the appearance of To Do List The To Do Preferences dialog box enables you to change the appearance of To Do List. 1 On the To Do List screen, tap Show. The To Do Preferences dialog box appears. 2 Change the To Do Preferences settings. You can
  • Sony PEG-SJ20 | Operating Instructions - Page 69
    completed items from To Do List. Run this command to save memory if you find too many recorded To Do items in your CLIÉ handheld. Note By default, the items that you purge will be saved onto the Palm Desktop for CLIÉ software on your computer during the next HotSync® operation. To delete the
  • Sony PEG-SJ20 | Operating Instructions - Page 70
    Pad is called a "memo." Creating a new memo A memo can contain up to 4,000 characters. The number of memos you can store is limited only by the memory available on your CLIÉ handheld. 1 Press the Memo Pad button on the front panel. Memo Pad starts up. Memo Pad opens to display the last Memo
  • Sony PEG-SJ20 | Operating Instructions - Page 71
    Creating memos (Memo Pad) 3 Enter the text you want to appear in the memo. To move down to a new line, tap the Enter key when using the onscreen keyboard or write when using Graffiti® writing. 4 Tap Done or press the BACK button when you finish. The first line of the memo is displayed. Tips • You
  • Sony PEG-SJ20 | Operating Instructions - Page 72
    The first line of a memo appears in the Memo List. This makes it easy to locate and review your memos. 1 Press the Memo Pad button on the front panel. Memo Pad starts and the Memo List is displayed. 2 Rotate the Jog Dial™ navigator
  • Sony PEG-SJ20 | Operating Instructions - Page 73
    Creating memos (Memo Pad) Viewing memos by category Press the Jog Dial navigator when the memo list is displayed but no memo is selected. Each time you press the Jog Dial navigator, the display toggles through all the available categories. Selecting the desired category from the categories list Tap
  • Sony PEG-SJ20 | Operating Instructions - Page 74
    . • Alphabetic: Sorts the memos in numerical and then alphabetical order. 5 Tap OK. To sort the memos manually In step 4, select Manual to activate manual sorting. Tap the memo you want to move in the Memo screen and drag it to the desired location. The memo is placed where you
  • Sony PEG-SJ20 | Operating Instructions - Page 75
    cancel deletion, tap Cancel. Tip If you select the "Save archive copy on PC" check box, the deleted memo will be saved onto the Palm Desktop for CLIÉ software on your computer during the next HotSync® operation. Chapter 2 Using Basic applications 75
  • Sony PEG-SJ20 | Operating Instructions - Page 76
    the desired category for the memo. Making a memo private You can hide a memo that you mark as private. If you define a password for your CLIÉ handheld, you must enter it to display private records. 1 On the Memo Pad screen, tap the memo you want to mark as private. 2 Tap Details. The
  • Sony PEG-SJ20 | Operating Instructions - Page 77
    selected category to another CLIÉ handheld via the infrared communications port. Creates a new memo. Deletes the current memo. The Delete Memo dialog box appears. Note By default, the memos that you delete will be saved onto the Palm Desktop for CLIÉ software on your computer during the next
  • Sony PEG-SJ20 | Operating Instructions - Page 78
    Using Calculator (Calc) Calculating with Calculator 1 Perform either of the following to start the Calculator: • Tap the Calculator icon. • Rotate the Jog Dial™ navigator to select Calc and press the Jog Dial navigator. • Tap the Calc icon on the Application Launcher screen. The Calculator screen
  • Sony PEG-SJ20 | Operating Instructions - Page 79
    button. M+ Places the current number in memory. Each new number you enter with the M+ button is added to the total stored in memory. The number that you add can be such as Memo Pad into Calculator. You can review the last series of calculations. Shows the version information for Calculator
  • Sony PEG-SJ20 | Operating Instructions - Page 80
    open applications, the Application Launcher screen displays the current time, battery level, and the application category. Selecting applications To open want to open. If you have many applications installed on your CLIÉ handheld, tap the scroll bar to see all the available applications. • Rotate
  • Sony PEG-SJ20 | Operating Instructions - Page 81
    Performing common tasks Categorizing applications The category feature enables you to manage the number of application icons that appear in the Application Launcher screen. You can assign an application to a category and then display a single category or all your applications. To categorize an
  • Sony PEG-SJ20 | Operating Instructions - Page 82
    Performing common tasks Note If you have a Memory Stick® media inserted in your CLIÉ handheld, a Card icon appears at the bottom of the drop-down categories list. For details on how to use the Memory Stick media, see page 136. Changing the Application Launcher display By default, the Application
  • Sony PEG-SJ20 | Operating Instructions - Page 83
    Performing common tasks To open the Application Launcher screen to the last-opened category or the last-used application 1 Tap the Home 2 Tap the Menu icon. icon. The menu is displayed. 3 Tap Options, and tap Preferences. The Preferences screen is displayed. 4 Tap the Remember Last Category
  • Sony PEG-SJ20 | Operating Instructions - Page 84
    your CLIÉ handheld includes system-defined categories, such as All and Unfiled, and user-defined categories, such as Business and Personal. You cannot modify Book contains the QuickList user-defined category, in which you can store the names, addresses, and phone numbers that you might need in
  • Sony PEG-SJ20 | Operating Instructions - Page 85
    Performing common tasks Moving a record into a category 1 Tap the record that you want to categorize. 2 Address Book only: Tap Edit. The Address Edit screen appears. 3 Tap Details. 4 Tap the arrow V next to Category to display the list of available categories. 5 Tap the desired category for the item
  • Sony PEG-SJ20 | Operating Instructions - Page 86
    Performing common tasks Defining a new category 1 Tap the arrow V at the upper right corner of the screen. A list of available categories appears. 2 Tap Edit Categories. The Edit Categories screen is displayed. 3 Tap New. The Edit Categories dialog box is displayed. 4 Enter a new category name and
  • Sony PEG-SJ20 | Operating Instructions - Page 87
    Performing common tasks Finding records Your CLIÉ handheld lets you find information by entering text in the Find option dialog box or searching for a phone number using the Phone Lookup option. These two
  • Sony PEG-SJ20 | Operating Instructions - Page 88
    4 Tap the text in the find result list that you want to review. The application associated with the data automatically starts to display the data. More. Note The Find option is not case sensitive; searching for "sony" also finds "Sony." Tip Select text in an application before tapping the Find icon
  • Sony PEG-SJ20 | Operating Instructions - Page 89
    Performing common tasks Using the Phone Lookup option The Phone Lookup option lets you find a telephone number from the Address list screen and lets you add the information that appears in this list to a record. For example, you can add a telephone number from the Address list to an entry in Memo
  • Sony PEG-SJ20 | Operating Instructions - Page 90
    Performing common tasks 5 Tap Add. The Phone Lookup closes and the name and phone number are added to the record you displayed in step 1. To activate Phone Lookup with Graffiti® Write the Graffiti® Command stroke to activate Phone Lookup. Phone Lookup using text Drag and highlight text and then
  • Sony PEG-SJ20 | Operating Instructions - Page 91
    the password to view the private records. Assigning a password You can assign a password to protect your private records and to lock your CLIÉ handheld. 1 Rotate the Jog Dial navigator to select Security and press the Jog Dial navigator. Or tap the Security icon on the Application Launcher screen
  • Sony PEG-SJ20 | Operating Instructions - Page 92
    4 Enter the same password again to verify it and tap OK. Your password is assigned. In Password, "-Assigned-" is displayed. To lock your CLIÉ handheld with this password, see page 94. Changing or deleting a password 1 Rotate the Jog Dial navigator to select Security and press the Jog Dial navigator
  • Sony PEG-SJ20 | Operating Instructions - Page 93
    Performing common tasks 4 • To change the password, enter a new password and tap OK. • To delete the password, tap Unassign. If you forget your password If you forget your password, you can delete it. Note, however, that deleting a forgotten password also deletes all entries and records marked as
  • Sony PEG-SJ20 | Operating Instructions - Page 94
    , you must enter the exact password to restart your CLIÉ handheld. If you forget the password, you must perform a hard reset to resume using your CLIÉ handheld. Performing a hard reset deletes all the records in your CLIÉ handheld; however, you can restore all synchronized data at the next HotSync
  • Sony PEG-SJ20 | Operating Instructions - Page 95
    2 Tap Never. The Password screen appears. 3 Enter your password, and tap OK. The Lock Handheld screen appears. 4 Tap your choice from the list. • Never: Your CLIÉ handheld will not lock automatically. To lock it manually, you must tap Lock & Turn Off in the Security screen. • On power off: Your CLI
  • Sony PEG-SJ20 | Operating Instructions - Page 96
    Performing common tasks Making records private In all basic applications, you can make individual records private. Private records remain visible and accessible, until you select the Security setting to hide all private records. To mask or hide private records You can mask or hide your private
  • Sony PEG-SJ20 | Operating Instructions - Page 97
    icon appears at the right side of any item that has a note. Note icon Tip To display the note, tap the note icon. You can review or edit the note. To delete the note, tap Delete, and tap Yes. Chapter 2 Using Basic applications 97
  • Sony PEG-SJ20 | Operating Instructions - Page 98
    outdated records of Date Book or To Do List take up memory on your CLIÉ handheld, it's a good idea to remove them by using Purge Tap OK. If you chose to save a copy of the purged records, your CLIÉ handheld transfers them to an archive file on your computer the next time you perform a HotSync®
  • Sony PEG-SJ20 | Operating Instructions - Page 99
    text, Undo restores the text you removed. Undo also reverses deletions done by using backspace. Removes the selected text and stores it temporarily in the memory of your CLIÉ handheld. You can paste the text you cut into another area of the current application or into a different application. Copies
  • Sony PEG-SJ20 | Operating Instructions - Page 100
    Performing common tasks Choosing fonts In all basic applications, you can change the font style to make the text easier to read. You can choose a different font style for each application. 1 Open an application. 2 Tap the Menu icon. The menu is displayed. 3 Tap Options, and tap Font. 4 Tap the font
  • Sony PEG-SJ20 | Operating Instructions - Page 101
    link functions and how to import data from Windows applications. Contents What is a HotSync® operation 102 Performing a local HotSync® operation with the USB cable ... 103 Using the Palm™ Desktop for CLIÉ software 105 Starting the Palm™ Desktop for CLIÉ software 105 Basic operations of the Palm
  • Sony PEG-SJ20 | Operating Instructions - Page 102
    . The Palm Desktop for CLIÉ software can manage the data of multiple CLIÉ handhelds independently. 2 Back up the data stored on your CLIÉ handheld onto your computer. Synchronization ensures that your data is always safe and up-to-date. In case you need to perform a hard reset, a HotSync operation
  • Sony PEG-SJ20 | Operating Instructions - Page 103
    Do not disconnect your CLIÉ handheld from the USB cable until the HotSync operation is complete. Otherwise, the Palm Desktop for CLIÉ software may not quit normally. If the HotSync operation does not start Make sure that the HotSync icon is displayed in the Windows task tray on your computer screen
  • Sony PEG-SJ20 | Operating Instructions - Page 104
    operation with the USB cable If a message stating that the selected COM port is not available is displayed Follow the procedures below. If the same message appears again, uninstall the Palm Desktop for CLIÉ software and re-install it. 1 Click the HotSync icon in the Windows® task tray (bottom-right
  • Sony PEG-SJ20 | Operating Instructions - Page 105
    from Windows software onto your CLIÉ handheld. Starting the PalmTM Desktop for CLIÉ software Double-click the Palm Desktop for CLIÉ software icon on the Windows desktop or click Start, select Programs (All Programs in Windows XP), Sony Handheld, and click Palm Desktop for CLIÉ. The Palm Desktop for
  • Sony PEG-SJ20 | Operating Instructions - Page 106
    Desktop for CLIÉ software Locating the Palm Desktop for CLIÉ components 1 List pane Displays the records in the current Desktop application. 2 Application Launch bar Provides one-click access to each Desktop your CLIÉ handheld's Details screen. Chapter 3 Exchanging and updating data using a HotSync®
  • Sony PEG-SJ20 | Operating Instructions - Page 107
    is not running. • Available only when the Palm Desktop is running: Starts the HotSync Manager when you start the Palm Desktop for CLIÉ software. • Manual: Starts the HotSync Manager only when you select HotSync Manager from the Windows Start menu. Continued on next page Chapter 3 Exchanging
  • Sony PEG-SJ20 | Operating Instructions - Page 108
    Advanced HotSync® operations 3 Click the Modem tab to display the modem settings and adjust the options as needed. See "Conducting a HotSync® operation via modem" on page 114 for more information. 4 If you are attached to a network, click the Network tab to display the network settings and adjust
  • Sony PEG-SJ20 | Operating Instructions - Page 109
    Memo Pad, the Palm Desktop for CLIÉ software offers System and Install conduits. The System conduit backs up the system information stored on your CLIÉ handheld. The Install conduit installs add-on applications to your CLIÉ handheld. 1 Click the HotSync icon in the Windows task tray (bottom- right
  • Sony PEG-SJ20 | Operating Instructions - Page 110
    Advanced HotSync® operations 4 Click Change. The Change HotSync Action dialog box appears. 5 Click the direction in which you want to write data, or click Do nothing. 6 Click OK. 7 Repeat steps 2 through 6 to change conduit settings for other applications (or users). 8 Click Done. Notes • Any change
  • Sony PEG-SJ20 | Operating Instructions - Page 111
    CLIÉ handheld to cable. Before you start performing an IR HotSync operation Check the following: • Your computer is equipped with an infrared port supporting the IrDA standards. • The infrared port of your computer is enabled for Windows use. To enable the IR port with Windows, see the manual
  • Sony PEG-SJ20 | Operating Instructions - Page 112
    port, see the Infrared Monitor in the Windows Control Panel. • Speed: Determines the speed and adjust downward if you experience problems. 4 Tap OK. Your computer HotSync operation with the USB cable after you make the HotSync your computer and your CLIÉ handheld, and select your Conduit Setup
  • Sony PEG-SJ20 | Operating Instructions - Page 113
    . Wait for the message showing that the HotSync operation is complete. To restore the local HotSync settings 1 Connect the USB cable to your computer. 2 Click the HotSync icon in the Windows task tray and clear the check mark of Local Serial from the shortcut menu. 3 Click the HotSync icon in the
  • Sony PEG-SJ20 | Operating Instructions - Page 114
    from your computer. + modem Your CLIÉ handheld away from your PC A HotSync operation with the PC at first HotSync operation must be local, using the USB cable. After that, you can perform a modem HotSync or terminal adapter is connected to your computer. • The Palm Desktop for CLIÉ software is
  • Sony PEG-SJ20 | Operating Instructions - Page 115
    computer is ready to receive a call from your CLIÉ handheld. 1 Verify the following, to prepare your computer for a software, are running on the COM port. • The computer is disconnected from all online services. This helps to avoid conflicts with the COM port. 2 Click the HotSync icon in the Windows
  • Sony PEG-SJ20 | Operating Instructions - Page 116
    " rate first, and adjust downward if you experience problems. This setting allows the Palm Desktop for CLIÉ software and your CLIÉ handheld to find and use the fastest speed. • Modem: Identifies the modem type or manufacturer. Refer to your modem manual or face plate for its type or settings. If
  • Sony PEG-SJ20 | Operating Instructions - Page 117
    the field to introduce a "pause" in the dialing sequence. Each comma equals a two second pause. 2 If the phone line you are using for your CLIÉ handheld has Call Waiting, select the "Disable call waiting" check box to avoid an interruption during the modem HotSync operation. 3 If you want to use
  • Sony PEG-SJ20 | Operating Instructions - Page 118
    HotSync operation The Conduit Setup dialog box on your CLIÉ handheld enables you to define which files and/or applications synchronize during synchronize all files. Note Applications that do not have a database (such as games) do not synchronize, even if you select the item in the Conduit Setup
  • Sony PEG-SJ20 | Operating Instructions - Page 119
    Advanced HotSync® operations Performing a HotSync operation via modem After you prepare your computer and your CLIÉ handheld, and select your Conduit Setup options, you are ready to perform a modem HotSync operation. 1 Rotate the Jog Dial navigator to select HotSync and press the
  • Sony PEG-SJ20 | Operating Instructions - Page 120
    Sync) or by using a USB cable that is connected to any computer on your Desktop for CLIÉ software and your CLIÉ handheld. You need to activate certain features, however, on both the Palm Desktop for CLIÉ software and your CLIÉ handheld. Preparing your computer 1 Click the HotSync icon in the Windows
  • Sony PEG-SJ20 | Operating Instructions - Page 121
    handheld to the USB cable and perform a HotSync operation. This HotSync operation records the network information about your computer onto your CLIÉ handheld is displayed. 4 On your computer, click the HotSync icon in the Windows task tray and select Setup from the shortcut menu. 5 Click the Network
  • Sony PEG-SJ20 | Operating Instructions - Page 122
    . The Modem Sync Preferences screen is displayed. 4 Tap Network. 5 Tap OK. The HotSync screen appears again. 6 Tap Modem, and tap Select Service. The Preferences screen is displayed. Note See "Changing the Network preferences" on page 172 for information on creating a network connection. 7 Tap the
  • Sony PEG-SJ20 | Operating Instructions - Page 123
    a modem HotSync operation " on page 118. 11 Perform a HotSync operation via modem. Follow the instructions in "Performing a HotSync operation via modem" on page 119. When connecting to the network computer via cable (LANSync) 1 Rotate the Jog Dial navigator to select HotSync and press the Jog Dial
  • Sony PEG-SJ20 | Operating Instructions - Page 124
    Setup from the Options menu. Follow the instructions in "To select the conduits for a modem HotSync operation " on page 118. 8 Perform a local HotSync operation. Follow the instructions in "Performing a local HotSync® operation with the USB cable" on page 103. Chapter 3 Exchanging and updating
  • Sony PEG-SJ20 | Operating Instructions - Page 125
    If you have data stored in Windows computer applications such as spreadsheets and databases, you can transfer that data to your CLIÉ handheld. Importable file formats Save data in one of the file formats listed below, import it into the Palm Desktop for CLIÉ software, and perform a HotSync
  • Sony PEG-SJ20 | Operating Instructions - Page 126
    HotSync® operations Importing data 1 Start the Palm Desktop for CLIÉ software. 2 Click the application into which you want application. 10 To add the imported data to your CLIÉ handheld, perform a HotSync operation. See the Palm Desktop for CLIÉ online Help for more information on importing and
  • Sony PEG-SJ20 | Operating Instructions - Page 127
    to import Address Book and Memo Pad information onto your CLIÉ handheld from a separate external file such as a company phone list. HotSync® Manager stores the data in a separate category on your Palm Desktop for CLIÉ software and your CLIÉ handheld. You can set the File Link feature to check for
  • Sony PEG-SJ20 | Operating Instructions - Page 128
    via the infrared communications port or Memory Stick® media, how to handle Memory Stick media, and how to use the Memory Stick Gate application for managing the data in Memory Stick media. Contents Beaming between your Sony CLIÉ Handheld and another Palm OS® PDA 129 What you can do with beaming
  • Sony PEG-SJ20 | Operating Instructions - Page 129
    Sony CLIÉ Handheld and another Palm OS® PDA What you can do with beaming Your CLIÉ handheld is equipped with an IR (infrared) port that you can use to beam information to another Palm OS® PDA business card. • An application installed in RAM memory. Note Some applications are protected and cannot be
  • Sony PEG-SJ20 | Operating Instructions - Page 130
    Beaming between your Sony CLIÉ Handheld and another Palm OS® PDA Beaming information You can beam a record, business card, or category of records between your CLIÉ handheld and another Palm OS PDA. 1 Locate the record, business card, or category you want to beam. 2 Tap the Menu icon. 3 Tap one of
  • Sony PEG-SJ20 | Operating Instructions - Page 131
    Beaming between your Sony CLIÉ Handheld and another Palm OS® PDA Receiving beamed information 1 Turn on your CLIÉ handheld. 2 Point the IR port directly at the IR port of the other Palm OS PDA handheld transmitting the data. The Beam dialog box is displayed. Beaming data starts. You can select the
  • Sony PEG-SJ20 | Operating Instructions - Page 132
    types of Memory Stick media with your CLIÉ handheld (PEG-SL10, PEG-SJ20, or PEG-SJ30). Note, however, that your CLIÉ handheld does not support the "MagicGate" copyright protection technology. You can use MagicGate Memory Stick media with your CLIÉ handheld only as standard Memory Stick media. Note
  • Sony PEG-SJ20 | Operating Instructions - Page 133
    from Memory Stick media. Push Memory Stick media gently into the slot and then release it so that Memory Stick media pops out. Then pull it out from your CLIÉ handheld. b Push Memory Stick media in. Pull Memory Stick media out. Continued on next page Chapter 4 Communicating using your Sony CLI
  • Sony PEG-SJ20 | Operating Instructions - Page 134
    and you cannot exchange data with Memory Stick media. If this occurs; - for PEG-SL10, replace the batteries with new ones. - for PEG-SJ20/PEG-SJ30, connect the AC power adapter or fully charge your CLIÉ handheld. • Use the Memory Stick Gate application to format Memory Stick media you use in your
  • Sony PEG-SJ20 | Operating Instructions - Page 135
    , a message prompting you to format it is displayed. To use Memory Stick media in your CLIÉ handheld, follow the instructions to format it. Note, however, that all stored data will be erased. Protecting the data in Memory Stick media To prevent accidental erasure of important data, you can use the
  • Sony PEG-SJ20 | Operating Instructions - Page 136
    , some Sony application may not start. For details, see page 152. Starting an application automatically when Memory Stick media is inserted The Memory Stick Autorun (MS Autorun) allows you to start a specified application automatically when Memory Stick media is inserted into your CLIÉ handheld. You
  • Sony PEG-SJ20 | Operating Instructions - Page 137
    memory space) of the Memory Stick media inserted into your CLIÉ handheld. You can also give a name to each Memory Stick media, which comes in handy when you have more than one Memory Stick Card dialog box appears. Chapter 4 Communicating using your Sony CLIÉ Handheld Continued on next page 137
  • Sony PEG-SJ20 | Operating Instructions - Page 138
    Application Launcher screen. The Memory Stick Gate application starts up. 2 Tap the Menu icon. The Menu screen appears. 3 Tap Options, and tap Format. The confirmation message appears. 4 Tap OK. Formatting starts. Chapter 4 Communicating using your Sony CLIÉ Handheld Continued on next page 138
  • Sony PEG-SJ20 | Operating Instructions - Page 139
    formatted by the computer. • If you remove or insert Memory Stick media during initialization, your Memory Stick media is not recognized by your computer. In this case, remove Memory Stick media, reinsert it, and start formatting again. Chapter 4 Communicating using your Sony CLIÉ Handheld 139
  • Sony PEG-SJ20 | Operating Instructions - Page 140
    handheld screen. Tip When the Memory Stick Gate application first recognizes the insertion of Memory Stick media, it automatically creates a default folder in the Memory Stick this icon to switch the view between your CLIÉ handheld and Memory Stick media. Tap this icon to display or hide the
  • Sony PEG-SJ20 | Operating Instructions - Page 141
    The following icons with explanations are displayed only when you view the contents of Memory Stick media. For the other icons, see "When displaying the contents of your CLIÉ handheld" (page 140). : Tap this icon to display upper the folder. : Tap this icon to display the contents of the folder
  • Sony PEG-SJ20 | Operating Instructions - Page 142
    file using the Memory Stick Gate application, a CLIÉ application may not function properly. Sony is not liable for any trouble with applications or be copied to Memory Stick media for back-up. If you copy them back to your CLIÉ handheld, the identical files in your CLIÉ handheld will be overwritten
  • Sony PEG-SJ20 | Operating Instructions - Page 143
    to Memory Stick media The Memory Stick Gate application allows you to save data inside your CLIÉ handheld to Memory Stick media. Notes • Since data copying consumes a lot of power, you cannot use Memory Stick media when your CLIÉ handheld is short of battery power. Connect the AC adapter. • If
  • Sony PEG-SJ20 | Operating Instructions - Page 144
    in the Memory Stick media. If this occurs, replace the batteries with new ones (PEG-SL10) or charge your CLIÉ handheld (PEG-SJ20/PEG-SJ30). Then try copying or moving again. If an overwrite confirm message appears, tap Yes or Yes to all. Chapter 4 Communicating using your Sony CLIÉ Handheld 144
  • Sony PEG-SJ20 | Operating Instructions - Page 145
    to select MS from the drop-down list. You can also select MS by tapping . The data in the default folder ("/PALM/PROGRAMS/MSFILES") in Memory Stick media is listed. Chapter 4 Communicating using your Sony CLIÉ Handheld Continued on next page 145
  • Sony PEG-SJ20 | Operating Instructions - Page 146
    Memory Stick® media 5 Tap to select the data you want to copy to your CLIÉ handheld. 6 Tap COPY. The Copy File dialog box is displayed. 7 Tap OK. The data selected in step 5 is copied to your CLIÉ handheld. cannot rename a read-only file. Chapter 4 Communicating using your Sony CLIÉ Handheld 146
  • Sony PEG-SJ20 | Operating Instructions - Page 147
    copied from Memory Stick media to your CLIÉ handheld will not be backed up during the next HotSync® operation. • A read-only file cannot be deleted. If you attempt to move a read-only file, it will be copied onto your CLIÉ handheld instead. Chapter 4 Communicating using your Sony CLIÉ Handheld 147
  • Sony PEG-SJ20 | Operating Instructions - Page 148
    can also select MS by tapping . The data in the "/PALM/PROGRAMS/MSFILES" folder of Memory Stick media is listed. 5 Tap to select the data that you want to delete. 6 Tap DELETE. The Delete File dialog box is displayed. Chapter 4 Communicating using your Sony CLIÉ Handheld Continued on next page 148
  • Sony PEG-SJ20 | Operating Instructions - Page 149
    7 Tap OK. The data selected in step 5 is deleted from Memory Stick media. To delete all data at once Tap Select All in step 5. To cancel the selection • To . The other folders cannot be selected. Note You cannot delete a read-only file. Chapter 4 Communicating using your Sony CLIÉ Handheld 149
  • Sony PEG-SJ20 | Operating Instructions - Page 150
    to default folder. Options menus Format Media Information About MS Gate Formats Memory Stick media inserted in your CLIÉ handheld. Displays the memory information of Memory Stick media. Shows the version information for Memory Stick Gate. Chapter 4 Communicating using your Sony CLIÉ Handheld 150
  • Sony PEG-SJ20 | Operating Instructions - Page 151
    files will not be copied together at the same time. • Data stored in the Memory Stick media (such as image files) will not be displayed. 1 Insert the Memory Stick media into the Memory Stick slot of your CLIÉ handheld. The contents of Memory Stick media are displayed. 2 Tap the Menu icon on your CLI
  • Sony PEG-SJ20 | Operating Instructions - Page 152
    move the file data to the CLIÉ handheld using the Memory Stick Gate application, or delete the files. If you do not use the Memory Stick Gate application when installing, applications and data files are stored in the "PALM/Launcher" folder. Chapter 4 Communicating using your Sony CLIÉ Handheld 152
  • Sony PEG-SJ20 | Operating Instructions - Page 153
    Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) This chapter describes how to customize your CLIÉ handheld by changing the Preferences time 165 Setting sounds 166 Turning the Alarm LED on or off (PEG-SJ20/PEG-SJ30) ....... 167 Turning the Beam Receive feature on or off 168 Entering
  • Sony PEG-SJ20 | Operating Instructions - Page 154
    on your Sony CLIÉ Handheld for the first time" in the Read This First manual. • Formats Set the region default and the formats for dates, times, calendar, and numbers. • General Set the auto shut-off interval, system sound, alarm sound, alarm LED feature (PEG-SJ20/PEG-SJ30 only), game sound, and
  • Sony PEG-SJ20 | Operating Instructions - Page 155
    V in the upper right corner of the screen and select the Preferences screen you want to view from the drop-down list. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 155
  • Sony PEG-SJ20 | Operating Instructions - Page 156
    assigned another application to the button, you can start the original application using the Application Launcher. To reset to the default settings Tap Default in step 2. All application buttons are reset to their factory settings. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 156
  • Sony PEG-SJ20 | Operating Instructions - Page 157
    of the following settings for the full-screen pen stroke. • Backlight: Turns on the backlight of your CLIÉ handheld without using the POWER button. • Brightness (PEG-SJ30 only): Opens the brightness adjustment screen. • Keyboard: Opens the onscreen keyboard for entering text. • Graffiti Help: Opens
  • Sony PEG-SJ20 | Operating Instructions - Page 158
    that you make in the HotSync Buttons screen become effective immediately. You can activate the selected application by pressing the HotSync button. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 158
  • Sony PEG-SJ20 | Operating Instructions - Page 159
    depending on the application you use. • In some applications with the Jog Dial navigator mark, part of functions may change when the JogAssist feature is activated. 1 Tap Jog from the drop-down menu by keeping the BACK button pressed. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 159
  • Sony PEG-SJ20 | Operating Instructions - Page 160
    the Preferences screen. The Formats Preferences screen is displayed. 2 Tap the arrow V next to "Preset to" and select a region name. 3 Tap OK. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 160
  • Sony PEG-SJ20 | Operating Instructions - Page 161
    to be Sunday or Monday. This setting controls the Day, Week, Month, and Agenda views in Date Book and all other aspects of your CLIÉ handheld that display a calendar. 4 Tap the arrow V next to Numbers and select formats for the decimal point and thousands separator. Chapter 5 Customizing your
  • Sony PEG-SJ20 | Operating Instructions - Page 162
    to set the date, time, time zone, and the on/off of daylight savings for your CLIÉ handheld. After you set the local date and time of your home base, you can change the displayed time 4 Tap the current month. 5 Tap the current date. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 162
  • Sony PEG-SJ20 | Operating Instructions - Page 163
    set the hour. 4 Tap the minute box and tap the arrow V or v to set the minute. 5 Tap AM or PM. 6 Tap OK. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 163
  • Sony PEG-SJ20 | Operating Instructions - Page 164
    Preferences screen. The Date & Time Preferences screen is displayed. 2 Tap the arrow V next to Daylight saving. 3 Tap and select On or Off. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 164
  • Sony PEG-SJ20 | Operating Instructions - Page 165
    to stay ON while it is connected to the cradle (not supplied) or the plug adapter (PEG-SJ20/PEG-SJ30 only) Make sure that the check box next to "Stay on in Cradle" is selected. To have it turn off automatically, clear the check box. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 165
  • Sony PEG-SJ20 | Operating Instructions - Page 166
    level from the drop-down list. 4 Tap the arrow V next to Game Sound and select the desired sound level or Off from the drop-down list. The Game Sound setting works only with the games that are programmed to respond to this setting. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 166
  • Sony PEG-SJ20 | Operating Instructions - Page 167
    (PEG-SJ20/PEG-SJ30) You can set the CLIÉ handheld to flash its LED at the set time. If you turn the Alarm Sound off and turn on the Alarm LED, you can make use of the CLIÉ handheld's LED feature • Off: Disables the Alarm LED feature Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 167
  • Sony PEG-SJ20 | Operating Instructions - Page 168
    off the Beam Receive feature to prohibit anyone from beaming information to your CLIÉ handheld, and to slightly save in battery power. 1 Tap General from the drop-down list on the Preferences screen. Disables the Beam Receive feature. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 168
  • Sony PEG-SJ20 | Operating Instructions - Page 169
    any other information that you want to associate with your CLIÉ handheld. If you use the Security application to lock your CLIÉ handheld with a password, the information that you enter in the Owner Security application) and tap OK. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 169
  • Sony PEG-SJ20 | Operating Instructions - Page 170
    area and enter the text that you want to appear when you write the ShortCut characters. 5 Tap OK. Continued on next page Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 170
  • Sony PEG-SJ20 | Operating Instructions - Page 171
    . 1 Tap the ShortCut you want to delete in the ShortCuts list and tap Delete. The confirmation dialog box is displayed. 2 Tap Yes. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 171
  • Sony PEG-SJ20 | Operating Instructions - Page 172
    , save, and reuse. 1 Tap Network from the drop-down list on the Preferences screen. The Network Preferences screen is displayed. 2 Tap the arrow V next to Service and select the predefined service template you want to use. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 172
  • Sony PEG-SJ20 | Operating Instructions - Page 173
    user name The User Name setting identifies the name you use when you log into your Internet Service Provider or your dial-in server. 1 On the Network Preferences screen, tap User Name field updates to display the word "-Assigned-." Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 173
  • Sony PEG-SJ20 | Operating Instructions - Page 174
    Waiting, and give special instructions for using a calling card. Note The Phone Setup dialog box works correctly for AT&T and Sprint long-distance services. However, because MCI works equals a two second pause. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) Continued on next page 174
  • Sony PEG-SJ20 | Operating Instructions - Page 175
    can add and edit settings. To add a new service template 1 On the Network Preferences screen, tap the Menu icon. 2 Tap New from the Service menu. An Untitled service template is added to the drop-down list for the Service field. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 175
  • Sony PEG-SJ20 | Operating Instructions - Page 176
    V next to Service and select the predefined service template you want to delete. 2 Tap the Menu icon. 3 Tap Delete from the Service menu. The Delete Service dialog box is displayed. 4 Tap OK. The selected service template is deleted. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 176
  • Sony PEG-SJ20 | Operating Instructions - Page 177
    service template, you may need to provide additional information to your ISP or dial-in server. You use the Details dialog box to add additional information to a selected service template. To select a connection type 1 On the Network Preferences screen, tap the service Service CLIÉ handheld (or
  • Sony PEG-SJ20 | Operating Instructions - Page 178
    log in script. For more information, see page 180. 1 On the Network Preferences screen, tap the service field. 2 Tap Details. The Details screen is displayed. 3 Tap Script. The Log in Script screen is displayed. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) Continued on next page 178
  • Sony PEG-SJ20 | Operating Instructions - Page 179
    one. The Password command is usually followed by a Send CR command. • Delay: Tells your CLIÉ handheld to wait a specific number of seconds before executing the next command in the login script. • Get IP complete. 6 Tap OK. 7 Tap OK. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 179
  • Sony PEG-SJ20 | Operating Instructions - Page 180
    is not subject to any special processing ordinarily associated with that character. Examples: • \^ : Includes a caret as part of the string • \< : Includes a < as part of the string • \\ : Includes a backslash as part of the string Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 180
  • Sony PEG-SJ20 | Operating Instructions - Page 181
    page 99. Service menus New Delete Duplicate Creates a new service template. Deletes the current service template. The Delete Service dialog box appears. Duplicates the current service template. Options communication fails and why. Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences) 181
  • Sony PEG-SJ20 | Operating Instructions - Page 182
    function enables the high resolution display of an application that does not support the high resolution mode. 1 Tap HiRes from the drop-down list game). • Display is divided into two, characters are distorted, or other operational irregularities occur. Chapter 5 Customizing your Sony CLIÉ Handheld
  • Sony PEG-SJ20 | Operating Instructions - Page 183
    189 Using Memory Stick® media to transfer data 191 Performing a HotSync® operation between your old CLIÉ handheld and the new Palm Desktop for CLIÉ software 193 Precautions 194 Notes on use 194 Battery considerations (PEG-SL10 195 Battery considerations (PEG-SJ20/PEG-SJ30 198 Troubleshooting
  • Sony PEG-SJ20 | Operating Instructions - Page 184
    up data of your Sony CLIÉ Handheld You can save a back-up copy of your CLIÉ handheld by performing either of the following three methods: • Backing up data to your computer through HotSync® operation • Backing up all data to a Memory Stick® media using the Memory Stick Backup application • Backing
  • Sony PEG-SJ20 | Operating Instructions - Page 185
    Backing up data of your Sony CLIÉ Handheld Backing up all CLIÉ data to a Memory Stick® media (using the Memory Stick Backup application) With the Memory Stick Backup application, you can back-up all the following CLIÉ handheld application and data to a Memory Stick media with a single tap. To
  • Sony PEG-SJ20 | Operating Instructions - Page 186
    can only restore data to the CLIÉ handheld from which you took that back-up. 1 Perform a hard reset on your CLIÉ handheld. For details, refer to "Performing a hard reset" on page 26. 2 Insert the Memory Stick media with the back-up files into the Memory Stick slot. 3 Tap the Home icon. 4 Rotate
  • Sony PEG-SJ20 | Operating Instructions - Page 187
    up data of your Sony CLIÉ Handheld 5 In the Memory Stick Backup screen, tap to select the back-up data that you want to restore from the list. 6 Tap (Restore). The Restore Confirm dialog box appears. 7 Tap OK. After the back-up data is restored, the CLIÉ handheld automatically shuts itself down
  • Sony PEG-SJ20 | Operating Instructions - Page 188
    the back-up will be erased. Insert Memory Stick media storing the back-up data into your CLIÉ handheld and use the Memory Stick Gate application to copy the data to your CLIÉ handheld. For details, see "Copying data in Memory Stick media to your CLIÉ handheld" on page 145. If an overwrite confirm
  • Sony PEG-SJ20 | Operating Instructions - Page 189
    Memory Stick® media to copy data: You can transfer all the necessary data and settings information more securely than using the Palm Desktop for CLIÉ software. Note on add-on applications that you have installed Install add-on applications using the same procedures as the previous CLIÉ handheld
  • Sony PEG-SJ20 | Operating Instructions - Page 190
    enter a different user name from that of your old CLIÉ handheld. If you enter the identical user name, the Palm Desktop for CLIÉ software may not be able to recognize the difference between your CLIÉ handhelds and the data of both handhelds may be mixed up or deleted. • If you copy UnsavedPreference
  • Sony PEG-SJ20 | Operating Instructions - Page 191
    Sony CLIÉ Handheld Using Memory Stick® media to transfer data You can use Memory Stick media to transfer data of your old CLIÉ handheld to your new CLIÉ handheld. Notes • Use Memory Stick media that has sufficient free memory space. • Make sure that the write protect tab on the Memory Stick
  • Sony PEG-SJ20 | Operating Instructions - Page 192
    Using data of another Sony CLIÉ Handheld 5 Tap OK. The data selected in step 3 is copied onto Memory Stick media. 6 Remove the Memory Stick media from your other CLIÉ handheld and insert it into your new CLIÉ handheld. 7 Rotate the Jog Dial navigator to select MS Gate and press the Jog Dial
  • Sony PEG-SJ20 | Operating Instructions - Page 193
    between that CLIÉ handheld and the Palm Desktop for CLIÉ software supplied with the PEG-SL10/PEG-SJ20/ PEG-SJ30. After setting up your CLIÉ handheld as indicated in the Read This First manual, perform the HotSync operation as indicated on page 103. If you have any trouble with the HotSync operation
  • Sony PEG-SJ20 | Operating Instructions - Page 194
    the connection cord or AC adapter. Touching them may cause an electric shock. (PEG-SJ20/PEG-SJ30 only) • To prevent fire or shock hazard, do not expose the AC adapter to water or moisture. (PEG-SJ20/PEG-SJ30 only) Cleaning your CLIÉ handheld Clean your CLIÉ handheld with a soft, dry cloth. Cleaning
  • Sony PEG-SJ20 | Operating Instructions - Page 195
    (PEG-SL10) Follow these precautions when you install or replace the batteries. When replacing the batteries • INSERT THE NEW BATTERIES WITHIN 1 MINUTE AFTER REMOVING THE EXHAUSTED ONES. IF THE BATTERY IN YOUR CLIÉ HANDHELD IS FULLY DISCHARGED OR REMOVED, ALL DATA STORED ON THE SDRAM (MEMORY
  • Sony PEG-SJ20 | Operating Instructions - Page 196
    conditions and environment where you use your CLIÉ handheld. • IF THE BATTERY IN YOUR CLIÉ HANDHELD IS FULLY DISCHARGED OR REMOVED, ALL DATA STORED ON THE SDRAM (MEMORY) IS LOST. IN SUCH A CASE, PERFORMING A HOTSYNC® OPERATION ONCE THE BATTERIES ARE REPLACED CAN RESTORE BACKED UP INFORMATION SAVED
  • Sony PEG-SJ20 | Operating Instructions - Page 197
    replacing the batteries, data stored on your CLIÉ handheld may be lost. When the remaining battery indicator reads zero If your battery drains and you leave your CLIÉ handheld without replacing the batteries for an extended period of time, all of the stored data will be erased. Sony suggests you
  • Sony PEG-SJ20 | Operating Instructions - Page 198
    (PEG-SJ20/PEG-SJ30) Follow these precautions when you charge your CLIÉ handheld. Battery safety To prevent a battery from leaking, heating up, catching fire, bursting, etc., be sure to follow the cautions below: • Do not charge the battery in any other way than specified in this manual
  • Sony PEG-SJ20 | Operating Instructions - Page 199
    life • With a fully-charged battery, you can use your PEG-SJ20 CLIÉ handheld for approximately 15 days* or your PEG-SJ30 CLIÉ handheld for approximately 12 days*. * Based on an average of 30 minutes use of PIMs per day, with the backlight off. • Battery life varies depending on the conditions
  • Sony PEG-SJ20 | Operating Instructions - Page 200
    of that software. Operating problems I do not see anything on my CLIÉ handheld's screen. , Replace the batteries with new ones (PEG-SL10) or recharge your CLIÉ handheld (PEG-SJ20/PEG-SJ30). If your CLIÉ handheld still does not operate, try a soft reset. See "Resetting your Sony CLIÉ Handheld" (page
  • Sony PEG-SJ20 | Operating Instructions - Page 201
    " (page 166). My CLIÉ handheld has frozen. , Perform a soft reset. See "Resetting your Sony CLIÉ Handheld" (page 25). I performed a hard reset, but it does not solve my problem. (PEG-SL10 only) , Leave your CLIÉ handheld for more than 12 hours after removing the batteries. I cannot use the Jog Dial
  • Sony PEG-SJ20 | Operating Instructions - Page 202
    Troubleshooting - Frequently Asked Questions Tapping and writing problems When I tap the buttons or screen icons, my CLIÉ handheld activates the wrong feature. , Calibrate the screen. See "What you can do with Preferences" (page 154). When I tap the Menu icon, nothing happens. , Not all
  • Sony PEG-SJ20 | Operating Instructions - Page 203
    Memo Preferences setting. Make sure that Sort by is set to Manual. , If you choose to view your memos alphabetically on the Palm™ Desktop for CLIÉ software and then perform a HotSync® operation, the memos on your CLIÉ handheld still appear in the order defined in the Memo Preferences setting, since
  • Sony PEG-SJ20 | Operating Instructions - Page 204
    . , If you use the Palm Desktop for CLIÉ software to change the category of the Address Book entry, you may not be able to locate the pasted image on your CLIÉ handheld. Change the category on your CLIÉ handheld. I cannot start applications installed in the Memory Stick media. , In order to open
  • Sony PEG-SJ20 | Operating Instructions - Page 205
    the correct conduit is selected. , Make sure that Intellisync Lite is installed. See "Step 4: Installing the Palm Desktop for CLIÉ software on your computer" in the Read This First manual for details. I cannot launch the HotSync Manager. , Make sure that you are not running another program, such
  • Sony PEG-SJ20 | Operating Instructions - Page 206
    Troubleshooting or the Palm Desktop for CLIÉ software menu. , Check that the USB cable is properly battery warning. Check the battery power of your CLIÉ handheld. If necessary, replace the batteries with new ones (PEG-SL10) or recharge your CLIÉ handheld (PEG-SJ20/PEG-SJ30). , If you have problems
  • Sony PEG-SJ20 | Operating Instructions - Page 207
    Troubleshooting - Frequently Asked Questions My CLIÉ handheld appears to freeze when I place it near my computer. , Move your CLIÉ handheld away from the computer's infrared port. , Make sure that you turn the Beam Receive function off. My CLIÉ handheld displays the message "Waiting for sender" when
  • Sony PEG-SJ20 | Operating Instructions - Page 208
    Troubleshooting - Frequently Asked Questions When I tap the HotSync icon on the HotSync screen, nothing happens on the Palm Desktop for CLIÉ software and my CLIÉ handheld times out. , Check the Palm Desktop for CLIÉ software HotSync Setup options to confirm that you have the correct settings for
  • Sony PEG-SJ20 | Operating Instructions - Page 209
    Troubleshooting - Frequently Asked Questions Connection problems I have trouble establishing a network connection to my ISP or dial-in server. , Check the Expanded Service Beaming problems I cannot beam data to another Palm OS PDA. , Confirm that your CLIÉ handheld and the other Palm OS PDA are
  • Sony PEG-SJ20 | Operating Instructions - Page 210
    Perform a soft reset. See "Resetting your Sony CLIÉ Handheld" (page 25) for more information. I cannot beam Address Book data. , You cannot beam images to a Palm OS PDA other than a Sony CLIÉ handheld. Recharging problems (PEG-SJ20/PEG-SJ30) When I connect my CLIÉ handheld to the AC adapter, it does
  • Sony PEG-SJ20 | Operating Instructions - Page 211
    from your computer to your CLIÉ handheld. I forgot the password and my CLIÉ handheld is locked. , If you assign a password and lock your CLIÉ handheld, you must perform a hard reset to continue using your CLIÉ handheld. See "Resetting your Sony CLIÉ Handheld" (page 25) for more information. Chapter
  • Sony PEG-SJ20 | Operating Instructions - Page 212
    Troubleshooting - Frequently Asked Questions Memory Stick® media problems I cannot copy/move data from Memory Stick® media to my CLIÉ handheld. , Your CLIÉ handheld requires a memory space of at least approximately 1.1 times the data size that you are copying/moving. I inserted Memory Stick media,
  • Sony PEG-SJ20 | Operating Instructions - Page 213
    troubleshooting list and the HotSync® operation problem persists, review the following. You cannot perform a HotSync operation before you install the Palm Desktop for CLIÉ software on your computer If you perform a HotSync operation before you install the CLIÉ drivers, other drivers using Windows 95
  • Sony PEG-SJ20 | Operating Instructions - Page 214
    or trouble, please refer to one of the following for a solution: ■ Read This First (supplied), Operating Instructions (this guide), and Add-on Application Guide (supplied) describes how to use your CLIÉ handheld. ■ Your Sony CLIÉ Handheld support Web site http://www.sony.com/peg/support/ Provides
  • Sony PEG-SJ20 | Operating Instructions - Page 215
    IrDA (1.2) Memory Stick slot Display PEG-SL10/PEG-SJ20: Monochrome LCD with backlight, 320 ✕ 320 dots, 16 levels PEG-SJ30: TFT color LCD with backlight, 320 ✕ 320 dots, 65,536 colors Power requirements PEG-SL10: Two AAA (LR03) alkaline batteries: 3 VDC PEG-SJ20/PEG-SJ30: AC power adapter (supplied
  • Sony PEG-SJ20 | Operating Instructions - Page 216
    mm) (w/h/d) (projecting parts not included) PEG-SJ20/PEG-SJ30: Approx. 2 7/8 ✕ 4 1/8 ✕ / 11 16 inches (71.8 x 104.0 x 16.8 mm) (w/h/d) (projecting parts not included) Mass PEG-SL10: Approx. 3.6 oz (103 g) (including the supplied stylus, excluding alkaline batteries) PEG-SJ20: Approx
  • Sony PEG-SJ20 | Operating Instructions - Page 217
    185 By Memory Stick Gate (to Memory Stick media 187 Backlight Adjusting the brightness 24 Turning on and off 24 Chapter 6 Additional information Battery considerations Tips and notes 195,198 Troubleshooting 210 Battery life 196,198 Beam Receive feature 168 Beaming Between two handhelds 129
  • Sony PEG-SJ20 | Operating Instructions - Page 218
    46 Week view 36 Deleting Data in the Memory Stick media 148 Items 45, 58, 67, 75 Hard reset 26 HotSync operation File Link 127 LANSync 120, 123 Network Modem Sync 120 Overview 102 Selecting Conduit 109 HotSync® button 102, 158 HotSync® operation Setting setup options 107 Troubleshooting
  • Sony PEG-SJ20 | Operating Instructions - Page 219
    70 Editing memos 75 Reviewing memos 72 Using menus 77 Memory Stick Backup Backing up all CLIÉ data to Memory Stick media 185 Memory Stick Gate Copying CLIÉ data to Memory Stick media 143 Copying Memory Stick data to CLIÉ handheld 145 Deleting data 148 Formatting Memory Stick media 138 Notes
  • Sony PEG-SJ20 | Operating Instructions - Page 220
    Owner information 169 P Palm Desktop for CLIÉ Basic operations 105 Locating screen components 106 Starting 105 Password Deleting a password 92 Entering a password 91, 95, 173 Locking your CLIÉ handheld 94 Troubleshooting 211 Phone Lookup 89 PIM (Personal Information Management) Address Book
  • Sony PEG-SJ20 | Operating Instructions - Page 221
    164 Soft reset 25 Sorting items 52, 73 Specifications 215 Stylus How to use 9 Taking out the reset tip 25 Synchronizing handhelds Using Memory Stick media 191 Using Palm Desktop for CLI 189 Troubleshooting Applications 203 Beaming 209 Connection 209 HotSync operations 205 Memory Stick
  • Sony PEG-SJ20 | Operating Instructions - Page 222
    For the latest support information, check our official Sony CLIÉ Web site http://www.sony.com/clie/ For information on accessories http://www.sonystyle.com/micros/ clie/accessories/index.html
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
© 2002 Sony Corporation
Operating
Instructions
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Personal Entertainment Organizer
PEG-SL10/PEG-SJ20/PEG-SJ30
Basic operations of your
Sony CLIÉ Handheld
Using basic applications
Exchanging and updating
data using a HotSync
®
operation
Communicating using
your Sony CLIÉ Handheld
Customizing your Sony
CLIÉ Handheld
(Preferences)
Additional information
A-B8F-100-
11
(2)