Sony PEG-SJ20 Operating Instructions - Page 121
Preparing your CLIÉ handheld and performing a network HotSync, operation
UPC - 027242608023
View all Sony PEG-SJ20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Advanced HotSync® operations 5 Connect your CLIÉ handheld to the USB cable and perform a HotSync operation. This HotSync operation records the network information about your computer onto your CLIÉ handheld. 6 Check if your computer's network information (Primary PC name and Primary PC address) is entered in your CLIÉ handheld: 1 Rotate the Jog Dial navigator to select HotSync and press the Jog Dial navigator. Or tap the HotSync icon on the Application Launcher screen. The HotSync screen appears. 2 Tap the Menu icon. 3 Tap Primary PC Setup from the Options menu. The Primary PC Setup screen is displayed. 4 On your computer, click the HotSync icon in the Windows task tray and select Setup from the shortcut menu. 5 Click the Network tab, then click TCP/IP Settings to open the TCP/ IP Settings screen. 6 Confirm that the Primary PC name and Primary PC address on both screens displayed in sub-steps 3 and 5 match. If they do not match, change the Primary PC name and Primary PC address entered in your CLIÉ handheld, then tap OK. 7 On your computer, click OK to close the TCP/IP Settings screen and the Setup screen. Preparing your CLIÉ handheld and performing a network HotSync operation When dialing into a network (Network Modem Sync) 1 Rotate the Jog Dial navigator to select HotSync and press the Jog Dial navigator. Or tap the HotSync icon on the Application Launcher screen. The HotSync screen appears. 2 Tap the Menu icon. Continued on next page Chapter 3 Exchanging and updating data using a HotSync® operation 121