Sony PMW-EX3 Operating Instructions - Page 130
Operating Clips With a Computer - card reader
View all Sony PMW-EX3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Operating Clips With a Computer The clips recorded on SxS memory cards with this camcorder can be controlled on a computer or edited using the optional nonlinear editing software. For these purposes, the clips on an SxS memory card can be operated by directly loading the card in a computer or by connecting the camcorder or the optional SBAC-US10 SxS Memory Card USB Reader/Writer to the computer, using an USB cable as shown below. Preparations To use the ExpressCard slot of a computer If the computer is equipped with an ExpressCard/ 34 or ExpressCard/54 slot, you can directly insert the SxS memory card containing clips recorded with this camcorder and access to the files. For the operating requirements for the computer, see "Using the CD-ROM" on page 14.. Note The SxS Device Driver Software on the CDROM supplied with the camcorder must be installed on your computer. Before installation, be sure to read the enclosed SxS Device Driver Software End-User License Agreement. For information on installation of the driver, refer to the ReadMe on the supplied CD-ROM. For support information for the driver, visit the following URL: http://www.sony.net/SxS-Support/ to the ExpressCard slot SxS memory card Computer with SxS Device Driver Software installed With a Windows computer, check that a Removable Disk appears in My Computer. This indicates normal status. With a Macintosh computer, an icon is displayed on the menu bar. SxS PRO 8GB Connecting External Devices 130 Operating Clips With a Computer To connect with a USB cable When you connect the camcorder or the SBACUS10 SxS Memory Card USB Reader/Writer (optional) using the supplied USB cable, the memory card in the slot is acknowledged as an extended drive by the computer. When two memory cards are mounted in this camcorder, they are acknowledged as two independent extended drives by the computer. SxS memory card SxS PRO 8GB SBAC-US10 (optional) USB cable (supplied with SBAC-US10) USB cable (supplied with the camcorder) Notes • When connecting the USB cable to the computer, be careful to check the form and direction of the USB connector. • The camcorder and the SBAC-US10 do not work on the bus power from the computer. Supply the operating power independently. To check the connection to the camcorder 1 Turn the camcorder on by setting the power switch to CAMERA or MEDIA. A message prompting you to confirm that you wish to enable the USB connection is displayed in the viewfinder. Connect USB Now? Execute Cancel Note This message will not be displayed while another confirmation message or in-progress