Sony PMWF3K Operating Instructions - Page 105
Rec Review, Shockless, White, White Switch, <B>, ATW Speed, Menu items
View all Sony PMWF3K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
CAMERA SET Menu items Subitems and setting values Contents Rec Review Setting the playback time for Rec-Review 3 sec / 10 sec / Clip Set the time to play the last recorded clip using the RecReview function. 3 sec: Last 3 seconds 10 sec: Last 10 seconds Clip: Entire duration of the clip TLCS Level Setting the Total +1.0 / +0.5 / ±0 / -0.5 / -1.0 Level Control System (auto adjustment system of gain, iris and shutter) Note Mode The auto iris Backlight / Standard / control function Spotlight does not operate at present. Set the target level (to make brighter or darker) of auto iris control in TLCS. (This setting also affects the gain control in AGC mode and shutter-speed control in Auto Shutter mode.) +1.0: Approx. one stop further open +0.5: Approx. half a stop further open ±0: Standard -0.5: Approx. half a stop further closed -1.0: Approx. one stop further closed Set the auto iris control mode in TLCS. Backlight: Backlight mode to reduce darkening of the center subject against lights Standard: Standard mode Spotlight: Spotlight mode to reduce blown-out highlights on the center subject in the spotlight Speed -99 to +99 (+50) Set the tracing speed of TLCS control. AGC On / Off Turn the AGC (Auto Gain Control) function on/off. AGC Limit 3 / 6 / 9 / 12 / 18 dB Set the maximum gain in AGC. AGC Point F2.8 / F4 / F5.6 Set the iris point for switching to auto-iris and auto-shutter control when AGC is on. Auto Shutter On / Off Turn the Auto Shutter control function on/off. A.SHT Limit 1/100 1/150 1/200 1/250 Set the maximum shutter speed in Auto Shutter control. A.SHT Point F5.6 / F8 / F11 / F16 Set the iris point for switching auto-iris and auto-shutter control when Auto Shutter is on. Shockless White Setting the shockless white balance Off / 1 / 2 / 3 Select the speed of change in white balance when the white balance mode is switched. Set to "Off" to instantly change the white balance. Select a larger number to change the white balance more slowly through interpolation. White Switch Setting for the WHITE BALANCE switch ATW / MEM Select the mode (ATW or Memory B) selected at the B position of the WHITE BALANCE switch. ATW Speed Setting for Auto Tracing White Balance 1 / 2 / 3 / 4 / 5 Set the tracing speed of ATW. The larger the number you set, the speed becomes faster. Menu Configuration and Detailed Settings Setup Menu List 105