Sony RCD-W10 Operating Instructions - Page 12

To locate Do the following: The next or succeeding tracks During playback, turn AMS clockwise (or press > on the remote repeatedly) until you find the track. The beginning During playback, turn AMS of the current or counterclockwise (or press . on preceding tracks the remote repeatedly) until you find the track. A specific track In stop mode, turn AMS (or press number or track ./> on the remote repeatedly) name directly until you find the track number or track name, and press H. Tip To pause playing at the beginning of a track, turn AMS (or press ./> on the remote) after pausing playback. Playing directly using the number buttons Z You can playback a track directly by using the number buttons. Press the track number you want to play. When you select a track number over 10, press >10 first, then the corresponding number buttons. Example: To enter number 15, press >10, then 1 and 5. Locating a Particular Point in a Track Z You can locate a particular point in a track during playback or playback pause. Before using the remote, set SELECT to CD for operations on DECK A, or to CDR for operations on DECK B. SELECT m/M To locate a point Do the following While During playback, press and hold monitoring the m or M on the remote until you sound find the point. While observing the display During pause, press and hold m or M on the remote until you find the point. You will not hear the sound during operation. Tip "-Over-" appears if the disc reaches the end. Turn the AMS dial counterclockwise (or press . or m on the remote). Note Tracks that are only a few seconds long may be too short to scan using the search function. For such tracks, it is better to play the disc at normal speed. 12