Sony RCD-W10 Operating Instructions - Page 17

Recording/Editing

17

Insert the silence into the

end of the song (The function

of adding Post Gap)

You can insert the silence of 2 seconds between

the songs, when recording more than two tracks

at once. The silence is inserted according to the

following situations.

•

When recording is stopped.

•

When the disc of DECK A changes to the

next disc during Synchro-Recording. (RCD-

W50C only)

To use the function of adding Post

Gap

Set “Post Gap” of the setup menu to “On” during

stop. For details, see “Using the Setup Menu” on page

28.

Using the SBM (Super Bit

Mapping) function

When you record through the ANALOG input,

the SBM function enables you to record a 24-

bit high quality sound source by converting it

to a 16-bit source without reduction in sound

quality. This is made possible by incorporating

a noise-shaping filter in the 24-bit A/D

converter of this unit, which has a frequency

range designed to cover the range of human

hearing.

During recording pause, press SBM. The

indicator lights up.

When you press the button again, the function

is canceled and the indicator turns off.

Notes

•

You cannot change the setting while recording.

•

When you record through the DIGITAL OPTICAL

IN input, or when you make Synchro-Recording,

the SBM function is automatically canceled.

If “Auto Cut” appears in the

display (Auto Cut Function)

There has been no sound input for about 30

seconds during recording. The 30 seconds of

silence are replaced by a blank of about 3

seconds and the unit changes to recording

pause.

If the unit continues pausing for about 3

minutes after the Auto Cut Function activated,

recording stops automatically.

Note that this function does not activate if the

unit has started recording from a blank portion

or is synchro-recording from a CD on DECK

A.

Tip

You can turn off the Auto Cut Function. For details,

see “To turn off the Smart Space Function and Auto

Cut Function” below. Note that when you turn off the

Auto Cut Function, the Smart Space Function is also

turned off automatically.

If “Smart Space” appears in

the display (Smart Space

Function)

There has been an extended silence of 4 to 30

seconds in length during recording. When the

signal is input again, the silence is replaced

with a blank of about 3 seconds and the deck

continues recording.

Note that new track numbers may not be

marked for portions recorded while this

function is activated. Also, this function does

not activate even if there has been an extended

silence of 4 to 30 seconds in length when the

deck started recording from the blank portion.

To turn off the Smart Space Function

and Auto Cut Function

Set “Smart Space” in Setup Menu to “Off.” For

details, see “Using the Setup Menu” (page 28).

Note

When you turn off the Smart Space Function, the

Auto Cut Function is also turned off automatically.

Sony RCD-W10 Operating Instructions - Page 17

If Smart Space appears

Page 17 highlights