Sony RCP-1500 Operation Guide - Page 40

When [Page Permission] is pressed: Page Permission Engineer Mode Exit Full Lock View Mode Full Paint The following settings can be configured. [Full Lock] : Press this to light the button and prohibit all operations of the control panel. [View Mode] : Press this to light the button and prohibit all operations of the control panel except for viewing data. [Full Paint] : Under the default settings, all operations of the control panel are prohibited except for custom paint menu operations. Press this to light the button and permit all other operations of the control panel. When [Item Permission] is pressed: Engineer Mode menu. You can save a Custom Preset Matrix file, and save or readout the file from a Memory Stick. 3 Press [Exit] when the settings are finished. The Security screen reappears. 4 Press [Engineer Mode] to cancel engineer mode. To protect operations with a security code To prevent unwanted operations, you can protect operation of the control panel with a security code. To enable security code protection Under the default settings, the security code is disabled. Use the following procedure to enable the security code. 1 For RCP-1500/1501, turn on the control panel while holding down the PARA, MASTER, and CUSTOM PAINT buttons. For RCP-1530, turn on the control panel while holding down the PANEL ACTIVE, IRIS/MB ACTIVE, and PAINT buttons. RCP-1500/1501 Holding down Auto Setup Enable The following settings can be configured. [Auto Setup Enable] : Press this to light the button and add the {Auto Setup} button to the Maintenance menu. The APR function of the control panel is permitted. [Ref File Enable] : Press this to light the button and permit the setting of the reference files of the control panel. [Lens File Enable] : Press this to light the button and permit the setting of the lens files of the control panel. [OHB File Enable] : Press this to light the button and permit the setting of the OHB files of the control panel. [Crop Enable] : Press this to light the button and permit the setting of 16:9 t 4:3 Crop of the control panel. [Knee Max Enable] : Press this to light the button and permit the knee max function. [3D Menu Enable] : Press this to light the button and permit 3D System and CCU 3D Monitor configuration of the control panel. Light [3D Menu Enable] when using the HDFA-200 and configuring the 3D system. [Custom Mtx Enable] : Press this to light the button and the Custom Matrix menu is added to the FILE 40