Sony RM-LP211 Operating Instructions - Page 14

Selecting a component (continued) If you selected the tape deck Move the easy scroll key to display the information about deck A or B. Note When the remote is programmed to control a non-Sony tape deck, the following may occur: - The information about deck B is not displayed and you cannot switch between tape deck A and B. - "TAPE A/B" is displayed and tape deck A and B switch automatically each time you press the easy scroll key, etc. If you selected 2ND ROOM or 3RD ROOM (North American model only) Move the easy scroll key to select the source for 2nd room or 3rd room, then press the key. Selecting a sound field Do the procedure below to select a sound field from the sound field list. 1 Press SOUND FIELD. The sound field list appears. 2 Move the easy scroll key to select the sound field, then press the key to enter the selection. A display example NORMAL SURROUND C.STUDIO EX A C.STUDIO EX B p C.STUDIO EX C To turn off the sound field Move the easy scroll key to select either "AUTO DECODING" or "2CH STEREO" in the sound field list in the display. Tip You can sort the sound field list (page 18). 14GB