Sony RM-LP211 Operating Instructions - Page 21
Turning the backlight on or, Adjusting the contrast of the, display, Switching the COMMAND - remote commander
View all Sony RM-LP211 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Using the lists 3 Move the easy scroll key to select "On" or "Off", then press the key to enter the selection. When you select "On", the TV INPUT list appears. p TV-VIDEO1 TV-VIDEO2 TV-VIDEO3 4 Move the easy scroll key to select the video input of the TV, then press the key to enter the selection. When you want to select component video input, select TV-COMPO1 or 2. Notes • Switching to VIDEO 1-6 input may not be automatic on all Sony TVs. This is because some TVs cannot receive remote control codes immediately after being turned on. • When you select "(Off)" in step 4, the TV input does not switch. Turning the backlight on or off Each time you press a button on the remote, the backlight turns on. If you do the procedure below to turn off the backlight, you can make the batteries last longer. 1 Press RM SET UP. The set up list appears. IR SET MENU EDIT AUTO POWER p BACK LIGHT 2 Move the easy scroll key to select "BACK LIGHT", then press the key to enter the selection. The BACK LIGHT list appears . p On Off 3 Move the easy scroll key to select "On" or "Off", then press the key to enter the selection. Adjusting the contrast of the display You can adjust the contrast of the display. 1 Press RM SET UP. The set up list appears. MENU EDIT AUTO POWER BACK LIGHT p CONTRAST 2 Move the easy scroll key to select "CONTRAST", then press the key to enter the selection. p+ - 3 Move the easy scroll key to select "+" or "-", then press the key to enter the selection. Each time you press the key, the contrast of the display changes. To exit adjusting, move the easy scroll key to select "Exit", then press the key to enter the selection. Switching the COMMAND MODE You can switch the command mode (AV SYSTEM1 or AV SYSTEM2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. Besides, you can set the remote for the 2nd room mode or 3rd room mode (North American model only). continued 21GB