Sony RM-LP211 Operating Instructions - Page 24
Specifications, Troubleshooting - replacement
View all Sony RM-LP211 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Additional Information Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. The remote does not function. • If the receiver's COMMAND MODE and the remote's COMMAND MODE do not match, transmission is not possible between the remote and the receiver (page 21). • Point the remote at the remote sensor on the receiver. • Remove any obstacles in the path between the remote and the receiver. • Replace all the batteries in the remote with new ones, if they are weak. • Make sure you select the correct function on the remote. • When you operate a programmed non-Sony component, the remote may not function properly depending on the model and the maker of the component. E appears in the display window of the remote. • The batteries are running out. Replace all the batteries with new ones. The function names that appear in the display windows of the receiver and the remote are different. • Select the correct function using the remote. Specifications General Remote control system Infrared control Power requirements 4.5 V DC with three R6 (size-AA) batteries Dimensions 175 x 63 x 30 mm Mass (approx.) 125 g excluding batteries Design and specifications are subject to change without notice. 24GBSony Corporation Printed in Malaysia