Sony RM-LP211 Operating Instructions - Page 22

Other operations (continued) 1 Press RM SET UP. The set up list appears. AUTO POWER BACK LIGHT CONTRAST p COMMAND MODE 2 Move the easy scroll key to select "COMMAND MODE", then press the key to enter the selection. The COMMAND MODE list appears. p MAIN ROOM 2ND ROOM 3RD ROOM 3 To select the command mode for the main room Move the easy scroll key to select "MAIN ROOM", then press the key to enter the selection. Move the easy scroll key again to select "AV SYSTEM1" or "AV SYSTEM2", then press the key to enter the selection. To select the 2nd room mode Using an optional IR repeater as shown below, the following operations are possible with the remote: • Switching sources. • Adjusting the volume. • Switching the power to on or off. Set the command mode of the remote to the 2nd room mode. Move the easy scroll key to select "2ND ROOM", then press the key to enter the selection. To select the 3rd room mode Move the easy scroll key to select "3RD ROOM", then press the key to enter the selection. Tips • Only when the remote is turned on by pressing SOUND FIELD or FUNCTION, the COMMAND MODE appears in the first line of the display. • Make sure that the command mode of the remote and the receiver in the main room is the same. Notes • The 3rd room mode is not available with STR-DA4ES. • The 2nd (or 3rd) room mode is available for North American model only. x 2nd room operation Main room Audio/Video components 2ND + ROOM OUT - - + 2nd room Monitor Speaker Speaker Amplifier STR-DA7ES/DA4ES IR repeater (not supplied) 22GB IR repeater (not supplied) TV ?/1 AV ?/1 ?/1 SYSTEM STANDBY SOUND FIRLD RM SET UP FUNCTION .> mM H X x TOP MENU/GUIDE AV MENU MASTER VOL MUTING + DISPLAY TV VOL + - O RETURN/EXIT TV CH + TV/VIDEO MAIN MENU WIDE ON SCREEN - - RM-LP211