Sony RMT-DPF1 Operating Instructions - Page 16
Basic operations, Preparing the remote control
View all Sony RMT-DPF1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Basic operations Preparing the remote control The supplied lithium battery (CR2025) has already been inserted into the remote control. Pull out the protective sheet before use as shown in the figure. Protective sheet Replacing the battery of the remote control If the remote control stops working, replace the battery (CR2025 lithium battery) with a new one. 1 Pull out the battery holder. While pressing in the tab of the battery holder, pull out the battery holder. Using the remote control Point the top end of the remote control towards the remote sensor on the photo frame. 2 Remove the old battery from the battery holder and then insert a new battery. Insert the battery so that "+" is facing upwards. Remote sensor 16 GB 3 Reinsert the battery holder into the remote control. WARNING Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. Notes • When the lithium battery becomes weak, the operating distance of the Remote conrol may shorten, or the Remote control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.