Sony SCD-XA777ES Operating Instructions / Mode d’emploi - Page 7
Connecting via DIGITAL CD OUT OPTICAL, connector, Connecting via DIGITAL CD OUT COAXIAL, Connecting - player
View all Sony SCD-XA777ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started Connecting via DIGITAL (CD) OUT OPTICAL connector Use an optical digital cable for this connection. When connecting the optical digital cable to the DIGITAL (CD) OUT OPTICAL connector, take the cap off the connectors and push the cable plugs in until they click into place. Be careful not to bend or twist the optical cable. Optical digital cable (not supplied) Note Only the audio signals of conventional CDs can be output from the DIGITAL (CD) OUT connectors. Those of the Super Audio CD cannot be output through DIGITAL (CD) OUT. Connecting via DIGITAL (CD) OUT COAXIAL connector Use a coaxial digital cable to connect the audio components equipped with coaxial digital input connectors. Coaxial digital cable (not supplied) About the ANALOG 2CH OUT When you play a conventional CD or a 2CH Super Audio CD, the stereo signal of the DSD format is sent to the FRONT, SURROUND, and CENTER/SUB WOOFER D/A Converters, and each signal is combined after D/A conversion, then combined signal is output from the 2CH OUT jacks. Since each digital signal is converted to analog signal by three converters, this system offers a three-fold improvement in a signal quality and a root three-fold in noise ratio, and results in improvement in a signal to noise ratio. Therefore, the high quality signal is output from the ANALOG 2CH OUT jacks. However, because of the system, no signal is output from the ANALOG 2CH OUT jacks during playback of a Multi-channel Super Audio CD. Similarly, no signal is output from the PHONES jack during playback of a Multi-channel Super Audio CD. Note Only the audio signals of conventional CDs can be output from the DIGITAL (CD) OUT connectors. Those of the Super Audio CD cannot be output through DIGITAL (CD) OUT. Connecting the AC power cord Connect the supplied AC power cord to the AC IN terminal on the player and to the mains. 7US