Sony SCD-XA9000ES Operating Instructions (primary manual) - Page 16

Playing a Disc Playing Discs The operations for normal play and the basic operations during play are explained below. POWER SACD/CD A OPEN/CLOSE N X x i.LINK .AMS> 1 Turn on the amplifier. Turn down the volume level to the lowest. 2 Select the player position using the input selector on the amplifier. 3 Press POWER to turn on the player. 4 Press A OPEN/CLOSE to open the disc tray, and place a disc on the tray. With the label side up 5 Press N. Playback starts from the first track. If you want to start playing from a specific track, turn . AMS > to select the track number before pressing N. 6 Adjust the volume on the amplifier. 16US Basic operations during play To Press Stop play x Pause play X Resume play after pausing X or N Locate a succeeding track Turn . AMS > clockwise Locate the beginning of the current track or a preceding track Turn . AMS > counterclockwise Eject the disc A OPEN/CLOSE z If you turn on the player when a disc is already loaded Playback starts automatically. If you connect a commercially available timer, you can set it to start playing the disc at any time you want. z To select a layer you want to listen to when playing a hybrid disc (page 15) Press SACD/CD repeatedly to light either the "SACD" or "CD." z To select a playback area you want to listen to when playing a 2 channel + Multi-channel Super Audio CD (page 15) Press MULTI/2CH repeatedly to light either the "MULTI CH" or "2 CH." Notes • During playback, increase the volume level gradually starting from the lowest level. The output from this unit may contain band width that are out of the normal listening range. This may cause damage to the speakers or ears. • When you change the playback area during the Program Play mode, the program is cleared. • When you change the playback area, the playback starts from the beginning of the same track. However, the playback starts from the first track depending on the disc. To use the i.LINK function You can output the sound through i.LINK S200 AUDIO OUT jack and enjoy the high quality sound. Refer to the Operating Instructions supplied with the connected component. Press i.LINK to turn on the i.LINK indicator. To turn off the i.LINK function and listen to the analog sound, press i.LINK again to turn off the i.LINK indicator. Note If you press N while the connected component is not ready for the i.LINK function (ex., while "i.LINK Connecting" appears in the display of STR-DA9000ES/TA-DA9000ES), the sound at the beginning of the track may be dropped out. When the i.LINK indicator lights up • No signal is output from all the other jacks (ANALOG 2CH OUT jacks, ANALOG 5.1CH OUT jacks, PHONES jack, DIGITAL (CD) OUT jacks). • The "D. FILTER", "D. OUTPUT", "2CH SPK MODE", "MCH SPK MODE", "LEVEL ADJUST" and "SPK DISTANCE" menu operations are not available.