Sony SDM-X75K Operating Instructions (English starts on page 25) - Page 39

Items 0 MODE RESET Options OK CANCEL Features You can reset BACKLIGHT, CONTRAST, BRIGHTNESS, GAMMA, COLOR, and SHARPNESS to the default setting. To cancel resetting and return to the menu. SCREEN menu (analog RGB signal only) x Automatic picture quality adjustment function When the display receives an input signal, it automatically adjusts the picture's position and sharpness (phase/pitch). This ensures that a clear picture appears on the screen (page 16). Note While the automatic picture quality adjustment function is activated, only the 1 (power) switch is operable. If the automatic picture quality adjustment function of this display did not seem to adjust the picture completely You can make further automatic adjustment of the picture quality for the current input signal. (See AUTO below.) If you still need to make subtle adjustments to your picture quality You can manually adjust the picture's sharpness (phase/pitch) and position (horizontal/vertical position). These adjustments are stored in memory and automatically recalled when the display receives the same input signal. These settings may have to be repeated if you change the input signal after reconnecting your computer. Items AUTO Features Make the appropriate adjustments of the screen's phase, pitch and horizontal/ vertical position for the current input signal and save them. x Adjust the picture's sharpness and position manually (PHASE/PITCH/H CENTER/V CENTER) You can adjust the picture's sharpness and position as follows. 1 Set the resolution to 1280 × 1024, on the computer. 2 Load the CD-ROM. 3 Start the CD-ROM and display the test pattern. For Windows User When Auto run operates: 1 Click "DISPLAY ADJUSTMENT TOOL (UTILITY)." 2 Click "Adjust" and confirm the resolution and then click "Next". Test pattern for PITCH, PHASE, H CENTER and V CENTER appears in order. When Auto run fails to operate: 1 Open "My Computer" and right click the CD-ROM icon. Go to "Explorer" and open the CD-ROM icon. 2 Open [Utility] and then select [Windows]. 3 Start [Win_Utility.exe]. Test pattern appears. For Macintosh user 1 Open [Utility] and then select [Mac]. 2 Start [Mac_Utility.exe] Test pattern appears. Items PHASE PITCH H CENTER V CENTER Press the m/M buttons Minimize the horizontal stripes on the screen. Vertical stripes become vanished. Adjust the picture position when your picture does not appear on the center of the screen. MENU POSITION menu GB Items Press the m/M buttons MENU POSITION You can change the menu displayed position on the screen. You can choose one of 9 positions. INPUT SENSING menu Those models of digital input search any input signals. You can switch the signals back and forth automatically. Items AUTO ON INPUT 1 INPUT 2 AUTO OFF Features When the selected input has no signal, or when you select an input with the OK button and if it has no input signal, an on-screen message appears (page 18). Then the display checks the input signal and switch to other input automatically. When an input is changed, the selected input is displayed on the upper left corner of the screen. When there still is no input signal, the display goes into the power saving mode. When turning on the display, INPUT1 or INPUT2 will be displayed as priority setting (INPUT SENSING will not function). The input is not changed automatically. Press the OK button to change the input. 15