Sony SDM-X75K Operating Instructions (English starts on page 25) - Page 41

Reducing the power consumption (ECO mode) If you press the ECO button on the front of the display repeatedly, you can select the screen brightness. ECO : HIGH ECO ECO : MIDDLE , ECO : LOW ECO : AUTO 50 Each mode appears on the screen and the screen brightness is reduced according to the mode. The menu automatically disappears after about 5 seconds. Screen brightness and power consumption are reduced as the mode changes from HIGH to MIDDLE to LOW. The default setting of the screen brightness is set to HIGH. Automatic brightness adjustment function (light sensor) This display is provided with a feature to automatically adjust the screen brightness according to the brightness of the surroundings. The brightness of the screen is set to the most appropriate level by setting the ECO mode to AUTO with the ECO button on the front of the display, or in the PICTURE ADJUST menu. The default setting of the brightness of the screen is set to HIGH. Also, when you set the ECO mode to "AUTO" with the ECO button on the front of the display, the adjustment bar is also displayed. You can adjust the bar with the m/M buttons. Screen brightness changes according to the level you set. Automatic picture quality adjustment function (analog RGB signal only) When the display receives an input signal, it automatically adjusts the picture's position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen. The factory preset mode When the display receives an input signal, it automatically matches the signal to one of the factory preset modes stored in the display's memory to provide a high quality picture at the center of the screen. If the input signal matches the factory preset mode, the picture appears on the screen automatically with the appropriate default adjustments. If input signals do not match one of the factory preset modes When the display receives an input signal that does not match one of the factory preset modes, the automatic picture quality adjustment function of this display is activated to ensure that a clear picture always appears on the screen (within the following display frequency ranges): Horizontal frequency: 28-80 kHz Vertical frequency: 48-75 Hz Consequently, the first time the display receives input signals that do not match one of the factory preset modes, the display may take a longer time than normal to display the picture on the screen. This adjustment data is automatically stored in memory so that, the display will function in the same way as when the display receives the signals that match one of the factory preset modes next time. If you adjust the phase, pitch, and picture position manually For some input signals, the automatic picture quality adjustment function of this display may not completely adjust the picture position, phase, and pitch. In this case, you can set these adjustments manually (page 15). If you set these adjustments manually, they are stored in memory as user modes and automatically recalled whenever the display receives the same input signals. Note While the automatic picture quality adjustment function is activated, only the 1 (power) switch will operate. GB KVM function (Keyboard-VideoMouse function) You can use up to two computers connecting between the USB mouse and USB keyboard switching INPUT/OK button (page 8) back and forth. About USB port • We recommend that you connect the USB mouse and the USB keyboard to the USB port of the display. If you connect the devices other than the above, the display might fail to operate properly. Or, the devices that are compatible with Bluetooth might fail to operate properly. • The USB port on the display is compatible with USB FullSpeed (Max 12 Mbps). Notes • Even when you press INPUT/OK button, the computers may not be able to switch back and forth promptly. • Install the latest USB driver to use the USB devices. The older USB driver may not operate properly. • When using a USB hub, set the input signals to the AUTO OFF with INPUT SENSING menu. 17