Sony SHAKE-X30D Operating Instructions - Page 20
Deactivating the demonstration, Inserting batteries, Positioning the speakers
View all Sony SHAKE-X30D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Deactivating the demonstration To deactivate the demonstration while the system is turned off, press DISPLAY repeatedly to select the no display mode (Power Saving Mode) (page 24). Inserting batteries Insert the two supplied R03 (size AAA) batteries, matching the polarities shown below. Positioning the speakers To obtain optimum performance from the system, we recommend you to place the speakers as shown below. Unit Left speaker (L) Right speaker (R) TV 0.3 m 0.3 m Note ••Do not mix an old battery with a new one or mix different types of batteries. ••If you do not use the remote control for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion. To operate the system using the remote control Point the remote control at the unit's remote control sensor. Note ••Check the speaker type by referring to the speaker label ("L" or "R") on the rear panel of the speaker. ••To obtain optimum Party Light effects, we recommend you to place the speakers from the wall as shown below. 45 cm 20GB