Sony SLV-N50 Operating Instructions - Page 51

Basic Operations Notes • If eight programs have already been set using the VIDEO Plus+ system (SLV-N60/AX20 only) or the TIMER SET/CHECK menu, "FULL" appears in the display window for about five seconds. • If you set the clock using the Auto Clock Set function, the clock will adjust itself to the incoming time signal regardless of adjustments made with the Dial Timer. Be sure you have set ACS correctly. • You cannot set the clock to February 29th using the Dial Timer. Please use the Auto Clock Set function to set the VCR to this day. • The indicator flashes in the display window when you complete the setting in step 9 with no tape inserted. • The VCR will be unlocked when: - You stop timer recording by pressing x STOP. - You insert a tape. - The AC power cord is disconnected or power supply stops. About the Demonstration Mode The Dial Timer function has a Demonstration Mode that allows the user, such as a salesperson, to enter more than eight examples of timer settings when demonstrating the use of the Dial Timer. It cancels the FULL notice which appears if eight programs have already been set. Do not use the Demonstration Mode for making timer recordings. Doing so may cause the settings to be inaccurate. To activate the Demonstration Mode Press X PAUSE on the VCR while turning the DIAL TIMER. "DEMO" appears in the display window for a few seconds. To cancel the Demonstration Mode Turn the power off and unplug the AC power cord. Although the Demonstration Mode is canceled, the timer settings entered while using the Demonstration Mode will remain. Be sure to manually cancel the timer settings before you use the Dial Timer or any other timer method after reconnecting the AC power cord (see page 61). Recording TV programs using the Dial Timer (SLV-N60/AX20 only) 51