Sony SPP-A945 Operating Instructions - Page 37
Mounting the base phone on a wall - wall mount
View all Sony SPP-A945 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Additional Information Mounting the base phone on a wall Hang-up tab 1 Remove the hang-up tab and replace it upside down. Additional Information Telephone line cord Wall bracket AC power adaptor cord 2 Attach the AC power adaptor cord and the telephone line cord to the wall bracket. 3 Hook the wall bracket to the wall plate, and plug the telephone line cord into the telephone outlet. If the wall plate is not available, use the two screws provided to mount the bracket. Wall plate If the wall bracket is unstable, tear off the two protuberances at the horizontal arrows (b/B) and insert them in the slots at the lower corners of the wall bracket, marked by the vertical arrows (v) . 4 Insert the upper tabs first, then press down the base phone so that the lower tabs on the bracket go into the base phone. Raise the antenna vertically. Additional Information 37EN