Sony SPP-IM977 Operating Instructions - Page 25
Additional tasks, Making calls when the headset is connected, Notes, Do this, Precaution
View all Sony SPP-IM977 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Basics Making calls when the headset is connected When the TL-HD1 headset (not supplied) is connected to the I (HEADSET) jack, you can talk through the headset. Precaution Avoid listening your headset at so loud a volume that extended play might affect your hearing. Additional tasks To Do this Adjust the handset volume Set the VOL switch to H (high), M (middle) or L (low). Put a call on hold Press (HOLD). The LINE 1 or LINE 2 button will flash slowly. Press (LINE 1) or (LINE 2) to resume the conversation. Switch to tone dialing temporarily Press (*TONE) after you're connected. The line will remain in tone dialing until disconnected. Notes • When you increase the sound volume, in some cases the back ground noise may be increased as well. You should adjust the volume accordingly. • If your conversation is muted and "CHANNEL SEARCHING..." appears on the display, move closer to the base phone; otherwise, the call will be disconnected after one minute. Tips • If you pick up another phone connected to the same phone line, the hold will be automatically released and you will be able to resume conversation on that phone. • The LINE 1 or LINE 2 button on the handset double flashes in succession, when the base phone is used. If you press (LINE 1) or (LINE 2) whichever button is flashing, you can talk to the base phone and to the line connected. continued Basics 25US