Sony SRXT105 Installation Guide (SXRD-install) - Page 20

Chapter 2 Installation and Connections Setting the Projector Start the SRX Controller. Display the Control Function Menu window, open the SETTING window, and set the functions of the projector. For details on the Control Function Menu window, see page 24. Owner Information The Owner Information window is used to set information on this projector. Displaying the SETTING Window 1 Click the "SETTING" button on the Control Function Menu window. The authentication dialog appears. 2 Enter the password in the "Password" text box, and click the "OK" button. The default setting of the password is "setting". The SETTING window opens. Owner Name: Enter the name of an owner of the projector. Organization: Enter the name of an organization. Projector Region: Enter the region where the projector is used. Location: Enter the location where the projector is installed. Name: Enter the desired name. Memo: Use to enter notes. Date & Time The Date & Time window is used to set the current date and time. Setting items 3 Click the desired setting item on the left of the window. The selected setting window opens. When you have completed the settings in each window Click the "APPLY" button at the lower part of each window. The settings are registered. Time Zone Sets the time difference in the area where the projector is installed. Select the time zone from the drop-down list displayed by clicking . Adjust clock for daylight saving changes: When you click the check box, the clock is automatically adjusted according to the daylight saving time of the selected time zone. 20 Setting the Projector