Sony STR-D360Z Operating Instructions - Page 15

Using Surround Sound Getting the Most Out of Dolby Pro Logic Surround Sound To obtain the best possible Dolby Pro Logic Surround sound, first select the center mode according to the speaker system you have. Then, adjust each speaker volume and delay time. Note that you must have at least one additional pair of speakers and / or one center speaker to do the following adjustments. CENTER LEVEL +/- SURROUND SURROUND MODE ON/OFF 0 0 0 ::: 000~ DOCCCO 1=1 000 REAR EFFECT/ LEVEL +/- DELAY TIME SET-UP SURROUND ON/OFF DELAY TIME REAR LEVEL +/- SURROUND MODE TEST TONE CENTER LEVEL +/- Selecting the center mode The receiver offers you four center modes: Phantom, 3 Channel Logic, Normal, and Wide. Each mode is designed for a different speaker configuration. Select the mode that best suits your speaker's system configuration: 1 Press SURROUND ON/OFF to turn on surround .„ sound. 2 Press SURROUND MODE repeatedly to select the Dolby surround sound field (PRO LOGIC or C. STUDIO mode). 3 Press SET-UP repeatedly until the set-up you want appears in the display. Select the set-up as follows: If you have Front and rear speakers, no center speaker Select PHANTOM Front and center 3 CH LOGIC speakers, no rear (3 Channel speaker Logic) Front and rear speakers, and a small center speaker NORMAL Front and rear speakers, and a large center speaker WIDE So that The sound of the center channel is output from the front speakers. The sound of the rear channel is output from the front speakers. The bass sound of the center channel is output from the front speakers (because a small speaker cannot produce enough bass). For "complete" Dolby Pro Logic Surround sound. (continued) 1 5EN