Sony STR-DA2800ES Operating Instructions - Page 42

7: Connecting to the network If you have an Internet connection, you can connect this receiver to the Internet. Configuration example The following illustration is a configuration example of a home network with the receiver, a computer. We recommend that you use a wired connection. Router LAN cable (not supplied) Modem Internet Computer LAN cable (not supplied) Note Connect a router to one among ports 1 to 4 of the receiver using only one LAN cable. Do not connect the same router to the receiver using more than one LAN cable. It may cause a malfunction. System requirements The following system environment is required to use the network function of the receiver. A Broadband line connection A Broadband line connection to the Internet is required in order to enjoy Internet video or to use the software update function of the receiver. Modem This is the device that is connected to the broadband line to communicate with the Internet. Some of these devices are integrated with the router. Router • Use a router compatible with 100 Mbps to enjoy content on your home network. • We recommend that you use a router equipped with the built-in DHCP (Dynamic Host Configuration Protocol) server. This function automatically assigns IP addresses on the LAN. • The receiver does not support a network connection with transmission speeds of 1 Gbps or greater. LAN cable (CAT5) • We recommend that you use this type of cable for a wired LAN. Some flat-type LAN cables are easily affected by noise. We recommend that you use normal-type cables. 42US