Sony STR-DA3600ES Operating Instructions (Large File - 16.4 MB) - Page 153
Setup Manager application software., Cannot access the receiver from
View all Sony STR-DA3600ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
- If there is another device between this device and the router, check that device is turned on. - Are all of the cables connected correctly and securely? - Is the settings to make sure that they match the router's settings (DHCP or fixed IP address)? • When using a computer, check the following: - The built-in firewall settings for the computer's operating system. - The firewall settings of your security software. To check the firewall settings of your security software, refer to your security software's Help section. • Register this device with the server. For details, refer to the instructions supplied with the server. • Wait for a few moments, and then try connecting to the server again. Cannot find or play back the content on the server. • On the " Music," " Photo," and " Video" screens, the receiver displays only the content that can be played back with the receiver from among the content offered by the server within the DLNA guidelines. • The content without a [*] mark before the name is offered by the server as that defined in the DLNA guidelines, and it can be played back with the receiver. The content with a [*] mark before the name is offered by the server as that not defined in the DLNA guidelines, and it may be played back with the receiver. • There may be content that is not displayed even if it can be played back with the receiver because it is not defined in the DLNA guidelines. However, the receiver may not be able to play back the content, even if it is defined in the DLNA guidelines. • The availability of certain content may differ, depending on the server software. If the content is not displayed or cannot be played back, try the supplied VAIO Media plus application software as your server software. Cannot connect to the receiver with the Setup Manager application software. • Does antivirus software, firewall software, or a network packet filter driver run on your computer? Deactivate such software temporarily, or change the settings to accept all incoming TCP or UDP packets from the receiver. Cannot access the receiver from the network controller. • Make sure "External Control" is set to "ON" in Network settings menu. • Is the network controller listed on the Controllers settings screen, and is the box for "Permit" checked? If the box is not checked, check the box for "Auto Permission," and return to the menu. Then, operate the receiver using the network controller once, and then uncheck the box for "Auto Permission." • If the network controller is a computer software controller, is the software filtered by antivirus software or firewall software? Permit UPnP communications between the software and the receiver. If the trouble is other than one of the cases described above and the trouble is not solved even if you wait for a while, perform either of the operations below. • Press ?/1 on the remote to turn the receiver off and then on again. • Hold down ?/1 on the receiver until the lamp above the button flashes in green to reboot the receiver. continued 153GB Additional Information