Sony STR-DA5800ES Operating Instructions (Large File - 19.74 MB) - Page 47

Getting Started Inserting batteries into the remote control Insert two R6 (size-AA) batteries in the RM-AAU154 remote control. Observe the correct polarity when installing batteries. RM-AAU154 Notes • Do not leave the remote control in an extremely hot or humid place. • Do not use a new battery with old ones. • Do not mix manganese batteries and other kinds of batteries. • If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. 9: Setting up the receiver using the Easy Setup You can set the basic settings of the receiver easily by operating the receiver in accordance with the instructions on the TV screen. Switch the input of the TV to the input to which the receiver is connected. When you turn on the receiver for the first time, the EULA screen appears on the TV screen. Agree to the EULA to proceed to the Easy Setup screen, then set up the receiver in accordance with the instructions on the Easy Setup screen. You can set up the following functions using the Easy Setup. - Network Settings - Input Settings - Home Control Settings - Speaker Settings Tip A check mark will be displayed to the right of any function items that you have set up. Notes on Speaker Settings (Auto Calibration) Insert the plug of the optimizer microphone all the way inside the AUTO CAL MIC jack. Confirm active subwoofer setup • When a subwoofer is connected, turn on the subwoofer and turn up the volume prior to activating the subwoofer. Turn the LEVEL knob to just before the mid-point. • If you connect a subwoofer with the crossover frequency function, set the value to maximum. continued 47US