Sony STR-DA6400ES Operating Instructions (Large File - 15.25 MB) - Page 159

6 Press V/v repeatedly to select the component you want, then press . 7 Press V/v repeatedly to select "Learn Mode," then press . 8 Press V/v repeatedly to select the code number you want to store as the new command, then press . 9 Keep pressing the corresponding button on the remote of the component to be programmed while pointing the remote towards the receiver's remote sensor until "Complete" is displayed on the TV screen. Remote sensor To cancel learning Select "Cancel" on one of the screens displayed in step 8, 10 and 11, then press . To use a command that has been learned 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen. 3 Press V/v repeatedly to select "Input," then press or b. 4 Press V/v repeatedly to select the component you want, then press . 5 Press QUICK CLICK. 6 Press V/v/B/b to select the button on the on-screen remote used to learn that function, then press . Using On-screen Remote (Quick Click) About 5 cm - 10 cm (2" - 4") "Test" is selected automatically after few seconds when the registration of a new code is completed. 10Press . The operation test of the programmed code is started. Proceed to step 11 if you will not perform the operation test. 11Press V/v/B/b repeatedly to select "Finish." Note The display window is turned off while the receiver is registering the new code. 159GB