Sony STR-DA6400ES Operating Instructions (Large File - 15.25 MB) - Page 45
: Displaying the GUI menu on the TV screen, Inserting batteries into the, remote
UPC - 027242732100
View all Sony STR-DA6400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Getting Started Inserting batteries into the remote Insert two R6 (size-AA) batteries in the main and the zone 2/zone 3 remote commanders. Observe the correct polarity when installing batteries. Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with old ones. • Do not mix manganese batteries and other kinds of batteries. • Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. • If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. • When you replace the batteries, the programmed remote codes may be cleared. If this happens, program the remote codes again (page 137). Tip When the remote no longer operates the receiver, replace all the batteries with new ones. 7: Displaying the GUI menu on the TV screen You can select the functions or change the settings of the receiver by using the GUI menu on the TV screen. Follow the procedure below to make the settings so that the GUI menu appears on the TV screen. Tip Refer to "Operating without connecting to a TV" (page 129) if you want to operate the receiver without connecting to a TV. ?/1 AMP GUI MODE MENU 1 Connect a TV monitor to this receiver. Refer to "3: Connecting the monitor" (page 26). 2 Turn on the receiver and the TV. 3 Press AMP. The receiver can be operated using the remote. continued 45GB