Home » Sony Manuals » Audio Components » Sony STR-DA6400ES » Manual Viewer

Sony STR-DA6400ES Operating Instructions (Large File - 15.25 MB) - Page 171

Specifications, AUDIO POWER

UPC - 027242732100

Add to My Manuals
Save this manual to your list of manuals

Page 171 highlights

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 120 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section POWER OUTPUT Rated Power Output at Stereo Mode1) 2) (8 ohms 20 Hz - 20 kHz, THD 0.09%): 130 W + 130 W Reference Power Output at Stereo Mode (4 ohms 20 Hz - 20 kHz, THD 0.15%): 130 W + 130 W Reference Power Output (8 ohms 1 kHz, THD 0.7%) FRONT2): 140 W + 140 W CENTER2): 140 W SURROUND2): 140 W + 140 W SURROUND BACK2): 140 W + 140 W Reference Power Output (4 ohms 1 kHz, THD 0.7%) FRONT2): 130 W + 130 W CENTER2): 130 W SURROUND2): 130 W + 130 W SURROUND BACK2): 130 W + 130 W 1)Depending on the sound field settings and the source, there may be no sound output. 2)Measured under the following conditions: Power requirements: 120 V AC, 60 Hz Frequency response PHONO MULTI CHANNEL INPUT, SA-CD/CD, TAPE, MD, TV, VIDEO 1/2, BD, DVD, SAT RIAA equalization curve ± 0.5 dB 10 Hz - 100 kHz ± 3 dB Inputs (Analog) PHONO MULTI CHANNEL INPUT, SA-CD/CD, TAPE, MD, TV, VIDEO 1/2, BD, DVD, SAT Sensitivity: 2.5 mV Impedance: 50 kohms S/N: 90 dB (A, 20 kHz LPF) Sensitivity: 150 mV Impedance: 50 kohms S/N: 100 dB (A, 20 kHz LPF) Inputs (Digital) BD, DVD, SA-CD/CD (Coaxial) VIDEO 1/2, TV, SAT, TAPE, MD (Optical) Impedance: 75 ohms S/N: 96 dB (A, 20 kHz LPF) S/N: 96 dB (A, 20 kHz LPF) Outputs TAPE (REC OUT), Voltage:150 mV MD (REC OUT), Impedance: 1 kohm VIDEO 1, ZONE 2, ZONE 3 (AUDIO OUT) FRONT L/R, CENTER, Voltage: 2 V SURROUND L/R, Impedance: 1 kohm SURROUND BACK L/R, SUBWOOFER FM tuner section Tuning range 87.5 - 108.0 MHz Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced Additional Information continued 171GB

Section	Page
Table of Contents	6
Description and location of parts	8
Getting Started	22
1: Installing speakers	22
2: Connecting speakers	24
3: Connecting the monitor	26
4a: Connecting the audio components	28
4b: Connecting the video components	33
5: Connecting the antennas (aerials)	43
6: Preparing the receiver and the remote	44
7: Displaying the GUI menu on the TV screen	45
8: Setting the speakers	46
9: Calibrating the appropriate speaker settings automatically (Auto Calibration)	48
Guide to on-screen display operation	55
Playback	58
Enjoying sound/images from the component connected to the receiver	58
Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT	60
Operating the TDM-iP1/ iP50 using the GUI menu of the receiver	62
Tuning	65
Listening to FM/AM radio	65
Presetting FM/AM radio stations	67
Listening to satellite radio	68
Connecting a satellite radio tuner	70
Preparing to listen to a satellite radio	70
Selecting a channel of the satellite radio	72
Presetting satellite radio channels	73
Restricting access to specific channels (Parental Lock) (SIRIUS only)	74
Enjoying Surround Sound	78
Playing back with 2-channel sound	78
Playing back with multi-channel surround	79
Enjoying a surround effect for music	82
Enjoying a surround effect for movies	84
Using Multi-zone Features	88
What you can do with the Multi-zone function	88
Making a multi-zone connection	89
Setting the speakers in zone 2	93
Switching the zone setting of the remote	94
Operating the receiver from another zone (ZONE 2/ZONE 3 operations)	95
Listening to the same music in different zone (Party Mode)	96
Using Other Features	98
Using “BRAVIA” Sync features	98
Switching the monitors that output the HDMI video signals	101
Switching between digital and analog audio	102
Enjoying the sound/ images from other inputs (Input Assign)	103
Using the sleep timer	105
Enjoying the surround effect at low volume levels	106
Recording using the receiver	107
Switching the command mode of the receiver and the remote	108
Using a bi-amplifier connection	109
Adjusting Settings	111
Using the setting menu	111
Auto Calibration	112
Speaker settings	114
Surround settings	118
EQ settings	119
Multi Zone settings	120
Audio settings	121
Video settings	123
HDMI settings	126
Network Settings	127
Quick Click settings	128
System settings	128
Operating without connecting to a TV	129
Using the Remote	134
Operating each component using the remote	134
Programming the remote	137
Performing several commands in sequence automatically (Macro Play)	141
Setting remote commander codes that are not stored in the remote	143
Clearing all the contents of the remote’s memory	144
Using On-screen Remote (Quick Click)	145
Operating components or lighting connected to the receiver using the on screen remote (Quick Click)	145
Preparing Quick Click	146
Using Quick Click	147
Setting components that are operated by the on- screen remote	153
Performing several commands in sequence automatically with Quick Click (Macro Play)	156
Setting remote control codes that are not stored in Quick Click	158
Resetting the remote code for Quick Click	160
Additional Information	161
Glossary	161
Precautions	164
Troubleshooting	165
Specifications	171

Match case Limit results 1 per page

171

Additional Information

Specifications

AUDIO POWER

SPECIFICATIONS

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

With 8 ohm loads, both channels driven, from

20 – 20,000 Hz; rated 120 watts per channel

minimum RMS power, with no more than

0.09% total harmonic distortion from 250

milliwatts to rated output.

Amplifier section

POWER OUTPUT

Rated Power Output at Stereo Mode

1) 2)

(8 ohms 20 Hz – 20 kHz,

THD 0.09%):

130 W + 130 W

Reference Power Output at Stereo Mode

(4 ohms 20 Hz – 20 kHz,

THD 0.15%):

130 W + 130 W

Reference Power Output

(8 ohms 1 kHz, THD 0.7%)

FRONT

140 W + 140 W

CENTER

: 140 W

SURROUND

140 W + 140 W

SURROUND BACK

140 W + 140 W

Reference Power Output

(4 ohms 1 kHz, THD 0.7%)

FRONT

130 W + 130 W

CENTER

: 130 W

SURROUND

130 W + 130 W

SURROUND BACK

130 W + 130 W

Depending on the sound field settings and the

source, there may be no sound output.

Measured under the following conditions:

Power requirements: 120 V AC, 60 Hz

Frequency response

Inputs (Analog)

Inputs (Digital)

Outputs

FM tuner section

Tuning range

87.5 – 108.0 MHz

Antenna (aerial)

FM wire antenna (aerial)

Antenna (aerial) terminals

75 ohms, unbalanced

PHONO

RIAA equalization

curve ± 0.5 dB

MULTI CHANNEL

INPUT, SA-CD/CD,

TAPE, MD, TV,

VIDEO 1/2, BD, DVD,

SAT

10 Hz – 100 kHz

± 3 dB

PHONO

Sensitivity: 2.5 mV

Impedance: 50 kohms

S/N: 90 dB (A, 20 kHz

LPF)

MULTI CHANNEL

INPUT, SA-CD/CD,

TAPE, MD, TV,

VIDEO 1/2, BD, DVD,

SAT

Sensitivity: 150 mV

Impedance: 50 kohms

S/N: 100 dB (A,

20 kHz LPF)

BD, DVD,

SA-CD/CD (Coaxial)

Impedance: 75 ohms

S/N: 96 dB (A, 20 kHz

LPF)

VIDEO 1/2, TV, SAT,

TAPE, MD (Optical)

S/N: 96 dB

(A, 20 kHz LPF)

TAPE (REC OUT),

MD (REC OUT),

VIDEO 1, ZONE 2,

ZONE 3 (AUDIO OUT)

Voltage:150 mV

Impedance: 1 kohm

FRONT L/R, CENTER,

SURROUND L/R,

SURROUND BACK L/R

SUBWOOFER

Voltage: 2 V

Impedance: 1 kohm

continued