Sony STR-DH510 Operating Instructions - Page 37

Basic Operations Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. , V/v/B/b O MENU AMP MENU 1 Press AMP MENU. 2 Press V/v repeatedly to select "SYSTEM", then press or b. 3 Press V/v repeatedly to select "SLEEP", then press or b. 4 Press V/v repeatedly to select the preset time you want, then press . The display changes as follows: OFF y 0-30-00 y 1-00-00 y 1-30-00 y 2-00-00 When sleep timer is being used, "SLEEP" indicator lights up in the display. Note A count down is displayed 1 minute before the receiver turns off. Tip To check the remaining time before the receiver turns off, repeat step 1 to 3 above. The remaining time appears on the display. Recording You can record from a video/audio component using the receiver. Refer to the operating instructions supplied with your recording component. Recording onto a recording media 1 Press one of the input buttons to select the playback component. You can also use INPUT SELECTOR on the receiver. 2 Prepare the playback component for playing. For example, insert the video tape you want to copy into the VCR. 3 Prepare the recording component. Insert a blank video tape, etc. into the recording component (VIDEO) for recording. 4 Start recording on the recording component, then start playback on the playback component. Notes • Some sources contain copy guards to prevent recording. In this case, you may not be able to record from the source. • Only analog signals are output from the analog output jack (for recording). • HDMI sound cannot be recorded. 37GB