Sony STR-DH510 Operating Instructions - Page 38

Tuner Operations Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas (aerials) to the receiver (page 29). Tip The tuning scale for direct tuning differs depending on the area code as shown in the following table. For details on area codes, see page 5. Area code U2, CA2 ECE, CEK, AU1 FM 100 kHz 50 kHz AM 10 kHz* 9 kHz * The AM tuning scale can be changed (page 39). TUNER BD DVD TV VIDEO DMPORT TUNER SAT/ CATV SA-CD/ CD Numeric buttons ENTER D. TUNING , V/v/B/b TUNING +/- O MENU m M .X x> AMP MENU Tuning into a station automatically (Automatic Tuning) 1 Press TUNER repeatedly to select the FM or AM band. 2 Press TUNING + or TUNING -. Press TUNING + to scan from low to high; press TUNING - to scan from high to low. The receiver stops scanning whenever a station is received. Using the controls on the receiver 1 Turn INPUT SELECTOR to select the FM or AM band. 2 Press TUNING MODE repeatedly to select "AUTO". 3 Press TUNING + or TUNING -. In case of poor FM stereo reception If the FM stereo reception is poor and "ST" flashes on the display, select monaural audio so that the sound will be less distorted. 1 Press AMP MENU. 2 Press V/v repeatedly to select "TUNER", then press or b. 3 Press V/v repeatedly to select "FM MODE", then press or b. 4 Press V/v repeatedly to select "MONO", then press . 5 To return to stereo mode, repeat steps 1 to 4 and select "STEREO" in step 4. SHIFT 38GB