Sony STR-DH510 Operating Instructions - Page 52
Advanced Operations, Switching between digital and analog audio (INPUT MODE)
UPC - 027242780002
View all Sony STR-DH510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Advanced Operations Switching between digital and analog audio (INPUT MODE) When you connect components to both digital and analog input jacks on the receiver, you can fix the audio input mode to either of them, or switch from one to the other, depending on the type of material you intend to watch. 1 Turn INPUT SELECTOR on the receiver to select the input. You can also use the input buttons on the remote. 2 Press INPUT MODE repeatedly on the receiver to select the audio input mode. The selected audio input mode appears on the display. Audio input modes x AUTO Gives priority to digital audio signals when there are both digital and analog connections. If there are more than one digital connection, HDMI audio signals have priority over COAXIAL and OPTICAL audio signals. If there are no digital audio signals, analog audio signals are selected. x COAX Specifies the digital audio signals input to the DIGITAL COAXIAL jack. x OPT Specifies the digital audio signals input to the DIGITAL OPTICAL jack. x ANALOG Specifies the analog audio signals input to the AUDIO IN (L/R) jacks. 52GB Notes • Some audio input modes may not be set up depending on the input. • When the Analog Direct function is selected, audio input is set to "ANALOG" automatically and you cannot select other modes.