Sony STR-DH720 Operating Instructions - Page 37
To cancel Auto Calibration, When Error Code appears, Checking the Auto Calibration, results - remote codes
UPC - 027242809345
View all Sony STR-DH720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Preparing the Receiver 7 Press V/v repeatedly to select the item you want, then press . • Retry: Performs the Auto Calibration again. • Save: Save the measurement results and exits the setting process. • Warning: Displays warning related to the measurement results. See "Message list after Auto Calibration measurement" (page 38). • Exit: Exits the setting process without saving the measurement results. 8 Save the measurement result. Select "Save" in step 7. Note You can select the calibration type you want by using the "Custom" Auto Calibration (page 38). 9 Disconnect the optimizer microphone from the receiver. Note If you reposition your speaker, we recommend that you perform Auto Calibration again to enjoy the surround sound. Tips • You can change the unit of distance in "Distance Unit" in the Speaker settings menu (page 66). • The size of a speaker ("Large"/"Small") is determined by the low frequency characteristics. The measurement results may vary, depending on the position of the optimizer microphone and speakers, and the shape of the room. It is recommended that you apply the measurement results. However, you can change those settings in the Speaker Settings menu. Save the measurement results first, then try to change the settings. To cancel Auto Calibration The Auto Calibration function will be canceled when you perform the following during the measurement process: - Press ?/1. - Press the input buttons on the remote control or turn the INPUT SELECTOR on the receiver. - Press MUTING or . - Press SPEAKERS on the receiver. - Change the volume level. - Connect the headphones. - Press SHIFT, then press AUTO CAL again. Checking the Auto Calibration results To check error code or warning message obtained in "Performing Auto Calibration" (page 36), proceed with the following steps. Press V/v to select "Warning" in step 7 in "Performing Auto Calibration" (page 36) then press . If a warning message appears, check the message and use the receiver without change. Or if necessary, perform Auto Calibration again. When "Error Code" appears Check the error and perform Auto Calibration again. 1 Press to select "ENTER". "RETRY ?" appears on the TV screen. 2 Press B/b to select "YES", then press . 3 Repeat step 6 to 9 in "Performing Auto Calibration" (page 36). continued 37GB