Sony STR-DN1010 Operating Instructions - Page 22
Bi-amplifier connection, Notes - receivers
UPC - 027242779945
View all Sony STR-DN1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
a)Notes on the SPEAKERS SURROUND BACK/ FRONT HIGH/BI-AMP/FRONT B terminals connection. - If you connect only one surround back speaker, connect it to L of this terminals. - If you are not using surround back speaker or front high speakers, and you have an additional front speaker system, connect the additional front speaker system to this terminals. Set "SB Assign" to "Speaker B" in the Speaker Settings menu (page 91). You can select the front speaker system you want using the SPEAKERS button on the receiver (page 37). - If you are not using surround back speaker or front high speakers, you can connect the front speakers to this terminals using bi-amplifier connection (page 22). Set "SB Assign" to "BI-AMP" in the Speaker Settings menu (page 91). b)When you connect a subwoofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to a subwoofer, then sound may not be output. Notes • Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals. • After you have install and connect your speaker, be sure to select the speaker pattern from the Speaker Settings menu (page 91). Bi-amplifier connection If you are not using surround back speakers or front high speakers, you can connect the front speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/FRONT B terminals using a bi-amplifier connection. Front speaker (Right) Front speaker (Left) Hi Hi Lo Lo Connect the jacks on the Lo (or Hi) side of the front speakers to the SPEAKERS FRONT A terminals, and connect the jacks on the Hi (or Lo) side of the front speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/FRONT B terminals. Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers. Not doing so may cause a malfunction of the receiver. After you have made the bi-amplifier connection, set "SB Assign" to "BI-AMP" in the Speaker Settings menu (page 91). 22GB