Sony STR-DN1010 Operating Instructions - Page 34
Function for conversion of video signals, Notes on converting video, signals, To connect a recording - 3d
UPC - 027242779945
View all Sony STR-DN1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Function for conversion of video signals This receiver is equipped with a function for converting video signals. Video signals and component video signals can be output as HDMI video signals (HDMI TV OUT jack only). INPUT jack OUTPUT jack HDMI IN HDMI TV OUT COMPONENT VIDEO IN COMPONENT VIDEO MONITOR OUT VIDEO IN MONITOR VIDEO OUT : Same type of signal as that of the input signal is output. : Video signals are upconverted and output. As the initial setting, video signals input from the connected component are output as shown in the table above. We recommend that you set the video conversion function to match the resolution of the monitor you are using. For details, see "Video Settings menu" (page 97). Notes on converting video signals • When video signals from a VCR, etc., are converted on this receiver and then output to your TV, depending on the status of the video signal output, the image on the TV screen may appear distorted horizontally or no image may be output. • HDMI video signals cannot be converted to component video signals and video signals. • The converted video signals are not output from the MONITOR VIDEO OUT and COMPONENT VIDEO MONITOR OUT jack. • When you play back a VCR with an image improvement circuit, such as TBC, the images may be distorted or may not be output. In this case, set the image improvement circuit function to off. • The resolution of the signals output to the HDMI TV OUT jacks are converted up to 1080p. • COMPONENT VIDEO MONITOR OUT jacks have restrictions on resolution when the resolution of video signals protected by copyright technology is converted. Resolution of up to 480p can be output to the COMPONENT VIDEO MONITOR OUT jacks. The HDMI TV OUT jack has no restriction on resolution. • Converted HDMI image output does not support x.v.Color (x.v.Colour), Deep Color (Deep Colour) and 3D image. To connect a recording component When recording, connect the recording component to the VIDEO OUT jacks of the receiver. Connect cords for input and output signals to the same type of jack, as VIDEO OUT jacks do not have an up-conversion function. Note Signals output from the HDMI TV OUT or MONITOR OUT jacks may not be recorded properly. 34GB