Sony STR-K650P Operating Instructions (HT-DDW650) - Page 34
Changing the command, mode of the receiver
View all Sony STR-K650P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Changing the command mode of the receiver This function is useful when you use 2 Sony receivers in the same room. 1 Turn off the receiver. 2 Hold down ENTER and press 1/u to turn on the receiver. "C.MODE.AVX" appears in the display. Each time you repeat the procedure above, the display changes as follows: C.MODE.AV1 y C.MODE.AV2 Tip The initial setting is "C.MODE.AV2". Notes • The command mode of the supplied remote is "AV2" and you cannot change this setting. • If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. 34US
34
US
Changing the command
mode of the receiver
This function is useful when you use 2 Sony
receivers in the same room.
1
Turn off the receiver.
2
Hold down ENTER and press
1/u
to
turn on the receiver.
“C.MODE.AVX” appears in the display.
Each time you repeat the procedure above,
the display changes as follows:
C.MODE.AV1
y
C.MODE.AV2
Tip
The initial setting is “C.MODE.AV2”.
Notes
•
The command mode of the supplied remote is
“AV2” and you cannot change this setting.
•
If the command mode of the receiver and the
remote is different, you cannot use the remote to
operate the receiver.