Sony STR-K650P Operating Instructions (HT-DDW650) - Page 38

Remote Button Description (continued) Remote Button Operations Function O DVD PLAYER/ Returns to the previous VIDEO menu or exits the menu. CASSETTE RECORDER (DVD mode) V/v/B/b Satellite tuner/ Selects a menu item. DVD PLAYER/ VIDEO CASSETTE RECORDER ENTER/ EXECUTE Satellite tuner/ Press to enter the DVD PLAYER/ selection. VIDEO CASSETTE RECORDER TV ?/1 TV Turns the TV on or off. TV VOL TV +/- Adjust the volume of the TV. TV CH +/- TV Select preset TV channels. TV/ TV VIDEO Selects input signal: TV input or video input. WIDE TV Selects the wide picture mode. Notes • Some functions explained in this section may not work depending on the model of the receiver. • The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described. • Press MAIN MENU on the remote before you use the V/v/B/b buttons for receiver operation. • Press TOP MENU/GUIDE or MENU/AV MENU on the remote before you use the remote to control the satellite tuner and DVD PLAYER/VIDEO CASSETTE RECORDER. • The >10/11 and 12 functions are not avaiable for set operation. Changing the factory setting of an input selector button If the factory settings of the input selector buttons do not match your system components, you can change them. For example, if you have a tape deck and you do not have an MD deck, you can assign the MD/TAPE button to your tape deck. Note that the settings of the DVD and VIDEO1 button cannot be changed. 1 Hold down the input selector button whose input source you want to change (for example, MD/TAPE). 2 Press the corresponding numeric codes of the component you want to assign to the input selector button (for example, 25 - Tape deck B). The following numeric codes are assigned to select the input source: To operate CD player Code(s) 22 MD deck 23 Tape deck A 24 Tape deck B 25 VCR (command mode VTR 2*) 26 VCR (command mode VTR 3*) 27 TV (SONY) 01 DSS (Digital Satellite Receiver) 30 DVD 21 Tuner 28 or 29 * Sony VCRs are operated with a VTR 2 or 3 setting. These correspond to 8mm and VHS respectively. Now you can use the MD/TAPE button to control the Tape Deck B. 38US