Sony STR-K790 Service Manual - Page 12
Str-k790, Electrical Adjustment - receiver
View all Sony STR-K790 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
STR-K790 Ver. 1.1 TUNER SECTION [FM Auto Stop Check] SET SECTION 3 ELECTRICAL ADJUSTMENT generator OUT (75 Ω) Procedure: 1. Turn the power on. 2. Input the following signal from Signal Generator to FM antenna input directly. * Carrier Freq : A = 87.5 MHz, B = 98 MHz, C = 108 MHz Deviation : 75 kHz Modulation : 1 kHz ANT input : 35 dBu (EMF) Note: Please use 75 ohm "coaxial cable" to connect SG and the set. You cannot use video cable for checking. Please use SG whose output impedance is 75 ohm. 3. Set to FM tuner function and scan the input FM signal with automatic scanning. 4. Confirm that input Frequency of A, B and C are detected and automatic scanning stops. The stop of automatic scanning means "The station signal is received in good condition." 12