Sony TA-P9000ES Operating Instructions - Page 6

Hooking Up the Components Power Amplifier Hookups Connect the rear, center, and front input jacks on your five channel power amplifier (Sony TA-N9000ES etc.) to the pre amplifier's PRE OUT jacks. For details, see the operating instructions supplied with your power amplifier. Connect a powered sub woofer to either of the PRE OUT WOOFER jacks. The same signal is output from both PRE OUT WOOFER jacks. Required cords Audio cords (3 cords are supplied) When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the components. White (L) White (L) Red (R) Red (R) Monaural audio cords (not supplied) For the PRE OUT CENTER and PRE OUT WOOFER jacks. Black Black z When making woofer and center channel connections You can use one set of pins (e.g., red) on the audio cord (not supplied) to connect the CENTER jacks and the other set (e.g., white) to connect the WOOFER jacks. TA-N9000ES etc. FRONT SPEAKERS +R - -L + S-LINK CTRL A1 REAR CENTER INPUT FRONT ( + ) ( + ) BTL BTL ( - ) ( - ) +R - -L + REAR SPEAKERS EXTRA 2CH OPERATION NORMAL BTL R L R L R L - + CENTER SPEAKER Make sure to power off when switching NORMAL BTL USE USE 4Ω MIN 8Ω MIN NORMAL BTL USE USE 8Ω MIN 16Ω MIN SPEAKER IMPEDANCE INPUT 1 FRONT REAR CENTER L INPUT 2 FRONT REAR CENTER L BYPASS 5.1ch FRONT REAR CENTER L BYPASS 2ch L R R R R WOOFER WOOFER WOOFER PRE OUT FRONT REAR CENTER L R WOOFER CTRL A1 TO POWER AMP TA-P9000ES 6GB Active Woofer INPUT AUDIO IN