Sony UBP-UX80 Operating Instructions - Page 22

x [DVD Aspect Ratio] [Letter Box]: Displays a wide picture with black bands on the top and bottom. [Pan & Scan]: Displays a full-height picture on the entire screen, with trimmed sides. x [Cinema Conversion Mode] [Auto]: Normally select this. The player automatically detects whether the material is video-based or film-based, and switches to the appropriate conversion method. [Video]: The conversion method suited for video-based material will always be selected regardless of the material. x [Pause Mode] [Auto]: Normally select this. Dynamic moving pictures appear without blurring. [Frame]: Displays static pictures at high resolution. [Audio Settings] x [Digital Audio Output] [Auto]: Normally select this. Outputs audio signals according to the status of the connected devices. [PCM]: Outputs PCM signals from the DIGITAL OUT (COAXIAL)/HDMI OUT jack. Select this if there is no output from the connected device. b This function is disabled during connection with a Bluetooth device. Audio format may be changed during Bluetooth connection. x [DSD Output Mode] [Auto]: Outputs DSD signal from HDMI OUT jack when playing Super Audio CD & DSD format file (if the connected device also supports DSD). Outputs LPCM signal from HDMI OUT jack when playing Super Audio CD & DSD format file (if the connected device does not support DSD). [Off]: Outputs PCM signals from HDMI OUT jack when playing Super Audio CD and DSD format file. b This function is disabled during connection with a Bluetooth device. Audio format may be changed during Bluetooth connection. x [BD Audio MIX Setting] [On]: Outputs the audio obtained by mixing the interactive and secondary audio to the primary audio. [Off]: Outputs the primary audio only. Select this to output Bitstream (Dolby/DTS) signals to an AV amplifier (receiver). z To enjoy Bitstream (Dolby/DTS) signals, set [BD Audio MIX Setting] to [Off] and [Digital Audio Output] to [Auto]. x [DTS Neo:6] [Cinema]/[Music]: Outputs the simulated multi-channel sound from 2 channel sources via the HDMI OUT jack according to the capability of the connected device using [Cinema]/[Music] mode. [Off]: Outputs the sound with its original number of channels via the HDMI OUT jack. b When [DTS Neo:6] is set to [Cinema] or [Music], [DSEE HX] cannot be set to [On]. x [48kHz/96kHz/192kHz PCM] [48kHz]/[96kHz]/[192kHz]: Sets the sampling frequency for the PCM signals output from the DIGITAL OUT (COAXIAL) jack. b Some device does not support [96kHz] and [192kHz] sampling frequency. x [DSEE HX] [On]: Upscales the audio file to a HighResolution Audio file and reproduces the clear high-range sound which is often lost. [Off]: Turns off the function. b Source must be 2ch and 44.1/48 kHz. x [Audio DRC] [Auto]: Performs playback at the dynamic range specified by the disc (BD-ROM only). Other discs are played back at the [On] level. [On]: Performs playback at a standard compression level. [Off]: No compression works. A more dynamic sound is produced. 22