Sony UBP-UX80 Operating Instructions - Page 29
Additional Information, Control for HDMI BRAVIA Sync, Others
View all Sony UBP-UX80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Additional Information • Delete pairing information once from the device list and connected device, before retrying connection. • Connection may not be possible if other Bluetooth devices are present around the player. In this case, turn off the other Bluetooth devices. • The connection registration information has been erased. Perform the connection operation again. There is no sound, the sound skips or fluctuates, or the connection is lost. • DVD AUDIO cannot be played via Bluetooth device due to DRM. • Move the Bluetooth device closer to the player. • Make sure the player is not receiving any interference from a Wi-Fi network, other Bluetooth device, other 2.4 GHz wireless device, or microwave oven. • Check that the Bluetooth connection is properly made between the player and the Bluetooth device. • Connect the player and the Bluetooth device again. • Keep the player away from metal objects or surfaces. Control for HDMI (BRAVIA Sync) The [Control for HDMI] function does not work (BRAVIA Sync). • Check that your TV is connected via the HDMI OUT 1 jack. • Check that [Control for HDMI] in [HDMI Settings] is set to [On] (page 24). • If you change the HDMI connection, turn the player off and on again. • If power failure occurs, set [Control for HDMI] in [HDMI Settings] to [Off], then set [Control for HDMI] in [HDMI Settings] to [On] (page 24). • Check the following and refer to the instruction manual supplied with the component. - the connected component is compatible with the [Control for HDMI] function. - the connected component's setting for the [Control for HDMI] function is correct. • When you connect the player to a TV through an AV amplifier (receiver), - if the AV amplifier (receiver) is not compatible with the [Control for HDMI] function, you may be unable to control the TV from the player. - if you change the HDMI connection, disconnect and reconnect the AC power cord, or a power failure occurs, try the following: 1Switch the input selector of the AV amplifier (receiver) so that the picture from the player appears on the TV screen. 2Set [Control for HDMI] in [HDMI Settings] to [Off], then set [Control for HDMI] in [HDMI Settings] to [On] (page 24). Refer to the instruction manual supplied with the AV amplifier (receiver). The System Power-Off function does not work (BRAVIA Sync). • Check that [Control for HDMI] and [Linked to TV-off] in [HDMI Settings] are set to [On] and [Valid] (page 24). Others Playback does not start from the beginning of content. • Press OPTIONS, and select [Play from beginning]. Playback does not start from the resume point where you last stopped playing. • The resume point may be cleared from memory depending on the disc when - you open the disc tray. - you disconnect the USB device. - you play other content. - you turn off the player. Message Code 1 [Playback stopped. The content being played is protected by Cinavia and is not authorized for playback on this device. For more information, see http://www.cinavia.com. Message Code 1] appears on the screen when playing a disc. • The audio track of the video that you are playing contains a Cinavia code indicating it was intended for presentation using professional equipment only and is not authorized for playback by consumers (page 36). 29